...95 wrangler and it bogs down when on the road and cuts out as if it is flooded. I have replaced the crank sensor, speed sensor, fuel filter, and the fuel pump. All I have left is the O2 sensor that I ...
jeep yj 4 cyllinder. I changed the engine and it will not start. There is no power coming to the coil. The ignition switch is okay, it is sending power from inside the car but it is not getting to the
jeep starts fine when it is cold like first thing the morning but driving around town turning it on and off it will not start again until engine cools. I just replaced the crank shaft sensor. its a 95
...Jeep Wrangler, 4.0L-6cyl. Recently had lift kit installed,, hence then a new Transmission 2003 NV3550 with a 95 bell housing. Previous Crank sensor on old tran was not even connected. All parts ...
95 Jeep Wrangler Rio Grande edition 4cyl, not getting a spark, replaced coil, plugs, distributer, and ignition module. What can I do next? are we getting power were we need it to the ignition module.
95 jeep wrangler not getting fire 95 jeep wrangler Yj with 2.5 4cyl. won't start, not getting fire. We have checked all the fuses, changed the plugs, wires, distributor cap, rotor, coil, installed
Question about 1995 Wrangler
Jeep 95 wrangler power to coil no spark changed wires cap coil need help never gave me a problem before won't sart checked ground everything looks good Jeep 95 no spark to distributer changed ...
...95 jeep Cherokee I went to fill up as I was putting gas the jeep was running. Once it was full I turn jeep off went into store came out and it wouldn't start back up. Changed the coil nothing changed ...
95 jeep wrangler shut of on me and wont start. When I tryed to turn it back on soon as it had shut down on me I noticed that the dash lights didn't come on like they usually do.engine turns over but ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions