Questions & Answers for: Hyundai e 60

Hyundai Lantra 1996 1.8l Could I get the torque settings for the head bolts. Thankyou. M1030 Nm (22 ft lb) + (60°+65°) + (60°+65°) M1235 Nm (26 ft lb) + (60°+65°) + (60°+65°)

...specified torque in the sequence shown below. Cylinder head bolt M10 : 25Nm (250kg.cm, 18lb.ft)+(60°- 65°)+(60°- 65°) M12 : 30Nm (300kg.cm, 22 lb.ft)+(60°- 65°)+(60°- 65°) hello, I just got a 2003 ...

...on the head bolts and cam bolts. 1.8L Head bolts: (M10) 30 Nm (300 kg.cm; 22 lb.ft) + (60°to 65°) + (60°to 65°) (M12) 35 Nm (350 kg.cm; 26 lb.ft) + (60°to

...pages listed below for future reference. CYLINDER HEAD BOLT: (M10) 30 Nm (300 kg.cm; 22 lb.ft) + (60°to 65°) + (60°to 65°) (M12) 35 Nm (350 kg.cm; 26 lb.ft) + (60°to

...1996 hyundai elantra cylinder head bolt torque 10 mm bolts step 1 22 ft lbs step 2 additional 60 degrees step 3 additional 60 degrees 12 mm bolts step 1 26 ft lbs. step 2 additional 60 degrees ...

head bolt torque setting M10 : 25Nm (250kg.cm, 18lb.ft)+(60°- 65°)+(60°- 65°) M12 : 30Nm (300kg.cm, 22 lb.ft)+(60°- ...

big ends torque settings head torque settings 10 mm bolts step 1 22 ft lbs. step 2 60 degrees step 3 additional 60 degrees 12 mm bolts step 1 26 ft lbs step 2 60 degrees step 3 additional 60 degrees

...tighten sequence-1.5L (VIN K), 1.6L (VIN R), 2.0L (VIN F) and 1996-98 1.8L (VIN M) enginesSpecs: 2.0L (VIN F) and 1996-98 1.8L (VIN M) engines- Tighten M10 bolts to 22 ft. lbs. (30 Nm), plus ...

...2003 elantra head bolts head bolt specs and cam caps 3 layer head gaskets torque to 22 ft/lb then 60°-65° then 60°-65°again. 2 layer head gasket torque to 18 ft/lb then 60°-65° then 60`-65° ...

...vehicle. The rockers and lifters were replaced. M10 bolts: 1st step; - 18 ft./lbs. 2nd step; - turn 60 degrees 3rd step; - turn 60 degrees M12 bolts: 1st step; - 22 ft./lbs. 2nd step; - turn 60 ...