...engines used in the 1986 ciera.The 4 cyl 2.5 litre timing specifications are 1-3-4-2. The 2.8 liter V6 Timing specs are 1-2-3-4-5-6. The 3.8 liter V6 timing specs are 1-6-5-4-3-2. Number 1 being the ...
need torque spec for a 1998 3.1 litre chevy v6 What is the torque spec for a 1998 chevy monte carlo with a 3.1 litre v6. Hi there:Are you refer at engine torque specf? Please confirm us.
Are there torque specs for the transmission pan on a 1993 mercury cougar 3.8 v6 I'm sure that there are torque specs. for this. I just did both pans on my 1999 Mercury Sable with a 3.0 Duratec V6 DOHC
Question about 1999 Toyota Camry Tie Rod End Replacement - Front, Driver And Passenger Side And Inner And Outer
what are the specs for my 1999 camry xle v6? I have a 1999 Camry XLE v6 I change the outer and inner tie rod ends I need the correct specs for inner and outer tie rod ends Where online can I find ...
...the owner's manual under "Specs" RockAuto shows it as .060 on the 3.8. 2000 CHEVROLET IMPALA 3 8L V6 Spark Plug RockAuto Just purchase the plugs for a 2000 Chevy Impala and it will say what the ...
Question about 2001 Dakota
What is hp and torque rating for a 2001 3.9 V6 in a quad cab Dakota with a 4 spd auto trans ? Here is JD Powers specs on the Dakota ...
Question about 2001 Dakota
torque specs on camshaft cap bolts on a 2010 ford ranger 4x4 sport 4.0 V-6 SOHC V6 Torque Specs Camshaft sprocket bolt: (E/MWM) Left: 63 lb-ft Right:LHT 63 lb-ft or 45 lb-ft if using 6485 socket ...
...courier V6 head cylinder specs
https://3f447m28lzom2c10ov383c38-wpengine.netdna-ssl.com/wp-content/uploads/2015/01/AERATorque310.20.14.pdf Give me a Ford courier v6 spec off cylinder head ...
Question about 2001 Dakota
...spec for the Chrysler 300 touring 3.5 V6 head cam bolts is 22 ft-lbs.It is important to use a torque wrench and follow the manufacturer's instructions when tightening head cam bolts. Always make sure ...
Question about 2004 XTerra
...a 2004 Nissan Xterra depend on the specific engine model. The torque specifications for the 3.3L V6 engine are as follows: Step 1: Tighten all bolts to 22 ft-lbs Step 2: Tighten all bolts to 59 ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions