Questions & Answers for: 43fdx01b convergence

...43FDX01B (convergence) problem Hitachi 43FDX01B, symptoms: Top left 1/4 of the screen distorted colours (convergence) red and green and in the middle of the screen horizontally red and green half ...

43fdx01b chasiss dp05f no pic, no sound some times convergence IC's coused to put set in shutdown unloading the three convergence connectors and trying to turn on the tv if the set turn on the problem

43FDX01B convergence red line wont move when in convergence service mode the red lines are wavey and i can move them right and left :( probably need to replace STK IC on convergence board and possibly

...make order in "MCMelectronics".,partstore.,bdent. Projection Color TV 43FDX01B Convergence Grid Centered on screen. How do I adjust top and bottom of

43FDX01B and the convergence Adj Grid is centered on the screen. Convergence if fine at the center but way off at the top and bottom. How do I get the grid to adjust the top, left, right and bottom of

...43fdx01b, Hitachi Symptom: Blue convergence off, bowed inward at the top and bottom with No blue vert movement. Cause: Replace IK05 (STK392-110) and RK54 (1.5 ohm/1W) and converge. RK50(2.2

...43fdx01b.distorted color, blue off set. Half moon line at the top, taking top part of picture. Ur convergence is dead.U need buy a convergence kit,U know how to solder right?Buy it at these ...

...43FDX01B Try adjusting the convergence. If it won't move see below- (or hitting Magic Focus for some Hitachi?s) This sounds like convergence output IC problem. convergence board would have to be ...

...43FDX01B Ur convergence it dead.U know how to solders?Buy a convergence kit at Tv repair World.com,Tvrepairkits.com.Replaced 2 convergence ICS,and all it resistors.Shop will cost u $300 for parts and ...

...43fdx01b and my convergence is off. the picture is bowed inward on the top and bottom of the screen. Do i need to replace my convergence chips Yes, and also check all low value resistors in ...