Questions & Answers for: wire motor capacitor wiring

wire, of the motor and the black wire and white wire of the power source. Does the black from the capacitor connect with the black of the motor and the black of the power source? That leaves the white

...Motor Brown wire is Start Yellow wire is run or Power Black wire is High Speed or Common The other two taps are speed taps, but you have a single speed application And high speed is what you need ...

...wire from the motor and look for any marks (red paint or a dash) on or beside the terminals on the new capacitor. If there is an identifying mark then connect the Purple wire to that terminal, if no ...

...wire, and the last one went to the "FAN" terminal on the old capacitor. The reason the old capacitor looks different is because it works for both the compressor and the fan motor (split capacitor). ...

...motor wire on capacitor. Black wire from motor (Hi Speed) connected to central air unit. Blue and red wires not connected. New motor is an AO Smith FD6000A. Has Black, brown/white, brown, ...

...wire from the motor i don't know if it goes to the top of the capacitor or direct connect to white from power box. Can you help me whit this problem. Thank You you should have a wiring diagram on the ...

...side of the capacitor where a power line wire connects and the other power line connects to the remaining motor wire. Confused? Draw it out on paper as explained and draw what is actualy on your

wire. The motor has a 4mu 250volt capacitor. This fan has an oscillating grill with independent sync motor, and timer circuit. Something was wrong with the solid state circuitry (everything worked but

...capacitor is usually connected in series with the motor's start winding. It helps provide an extra boost of power during motor startup. The wiring configuration typically involves connecting one lead ...