Questions & Answers for: 250 ex

...I adjust the valves?" You will also find lots of valuable information on your GPX 250 (called a "Ninja 250" or "EX 250" in America) on this web site: http://faq.ninja250.org/wiki/Main_Page Good

the lens on my casio digital camera ex-250 will not open camera when turned on fully charged does not open lens Try the procedures in this tip.

...250= in:0.15-0.20 mm ex:0.18-0.23mm. this should be about right for the E model as well. both the kle 400 and kle 500 from 1991-2005 carried valve clearances of= in:0.13-0.18 mm ex:0.18-0.23mm. ...

...250 goes thro water it stalls and there is water in the ex and intake the water is only up to the bottom frame rail it is splashing up? it mite be getting in to the magneto(under the cover near your ...

...250 keeps dying on me My bike dies after about one day of riding. When I change the plug it runs great for that same amount of time then completely dies again then will not start. It dies when Im ...

...250 ex needed battery replaced it with new still wont start...no power ignition switch on? help! Find the main fuse and check it. It's either got a corroded connection or it is 'blown'. If the fuse ...

EX - MP 250 series, I get this mesage: There was un unknown erorr Code = 19. What that mean? Printer is in use or an error has occurrred. check status. Scanner driver will be closed. Printer is in use

250 twister. my current gaps are, ex = 0.10mm and , in = 0.12.... please help, it doesnt sound right Your valves are adjusted backwards. Most Honda's will use: IN = 0.10 mm ( 0.004 in ) and EX 0.12 mm

...250, it idles ok but backfires and throws small flames from ex when throttle is opened fast, but not opened slowly, Nothing wrong with a bit of overfueling, the flames are a bit of a worry though. If ...

...- usually BT software on preference or options have the option to allocate bandwidth usually set on "0" which is unlimited - if you set for ex 250 - your limiting your download or upload to 250 ...