Questions & Answers for: Chevrolet 1500 2000 saturn sl2 spark

1984 chevy p/u with 305 no spark rebuilt dist & changed EST Module & still no spark to spark plugs what else can cause no spark? computer coil power try to disconet the spout wire..... its under the ...

I replaced my spark plug wires on my 1996 chevy truck. may have crossed one,need a diagram from the spark plugs to the distributer cap. Since you didn't state whether it is a V6 or V8, I'll give you ...

...spark plug wires and plugs and changed rotor in ditributer. Took out cat converter. Try this if you put it in 2nd gear and push on the gas slowly up to or at 1800-2000 rpm does it sputter and spurt. ...

spark to distributor from coil, no spark coming from plug wires, replaced ignition module, no help Hello Nummy. If you have spark at the coil the module is OK. The module fires the coil. Your problem ...

what is the proper spark plug gap for a 1990 Chev K1500? Usually tighten the spark plug to avoid generator combustion vapor excape because the vehicle speed may reduce. Alternately, the vehicle ...

...Escalade . Saturn 2000 LS/LS1/LS2/LW1/LW2 2001-2002 L100/LW100 2001-2003 L200/LW200 2001-2005 L300/LW300 2004-2005 L-Series 2002-2008 VUE 1996-2002 SL/SL1/SL2 1996-2002 SC1/SC2 1996-2002 ...

i hav an 88 chev half ton with a 350 turns over an its gettn gas to the throttel body but wont run no spark, spark advance's are not connected or bad timeing is my guess. take a plug wire off put a ...

2000 chevrolet silverado shows bad oxygen sensor replaced still misses bad shows bad oxygen sensor replaced with new one engine still misses SOUNDS LIE YOU NEED TO REPLACE THE SPARK PLUGS AND IGNITION

2000 SILVERADO 1500 4WD 5.3 L DONT START DONT WANT TO START Hi there:You will have to pinpoint what the engine is missing... Spark / Fuel / CompressionAll three of these are tested when

why is there no spark from spark plug 1995 k1500 silveraldo 1995 silverado has a distributor, remove the the distributor cap, make sure the distributor spins with the engine. also make sure the ...