Questions & Answers for: 2000 dodge caravan serpentine belt

Question about 2000 Caravan

1 Answer

...2000 dodge grand caravan. it's 6 cyl with 3.3 liter engine automatic. also to replace the AC clutch or compressor. can you pls tell me how to do both of them? thanks, roberto how to remove and ...

Ad

...Dodge Grand Caravan with a 3.3 V6 engine Here is digram of routing just take tension off tensioner and follow this daigram good Luck ...

Ad

Question about 2000 Caravan

2 Answers

...2000 Dodge Caravan but it will not stay on. Does anyone know how exactly to test the tensioner or should I just replace the whole assembly? sometimes you can look at the back with flash light it is ...

Question about 2000 Grand Caravan

1 Answer

and I cant see even half way. OK, click on the link below to be directed to a full size photo of your belt routing diagram. 2000 Grand caravan Serpentine Belt Routing Please rate and have a great day:

...dodge grand caravan? you need a 15mm wrench and skinny hands or a long belt router. place wrench on tensioner bolt and pull to rotate clockwise,at same time undo belt always holding tensioner, after ...

2000 Voyager. They should be close to the same. If you do not find the diagram under the hood comment back and I will get you a photo of the belt drive out of the manual for engine you have. If I can!

2000 dodge caravan serpentine belt slips off when it rains. How do we stop this? if belt is not worn beyond serviceability ,suspect tensioner pulley bearings--check pulley side play i.e. can you shake

...2000 dodge grand caravan i replaced the serpentine belt system on my 2000 dodge grand caravan with a gates solution kit. when i started the van the battery light came on . i replaced the battery and ...

May I please have a schematic for replacing the serpentine belt on a 2000 Dodge Grand Caravan? Here's a link to the belts.

Question about 2000 Grand Caravan

1 Answer

...2000 dodge caravan I had to replace the brushes on my 2000 Caravan alternator so I had to remove the serpentine belt. I was able to remove the belt by prying the idler pulley inwards to take of the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...