1996 mercury villager quits running My van will "intermittently" quit running. The problem is not reproducible. In most cases, it will die when you're making a turn, or when you start the car (not ...
1996 Mercury Villager with idle problems I have a 1996 Villager, with 86,000 and it has developed a severe idle problem. You have to keep the gas to it until it warms up and then it improves enough so
...1996-2001 model years. Gerry from Ford my question wasn't about knock sensor,my question was about my front power seat,is no longer moes I have no power to it I cannot find the fuse, relay orbreaker ...
i can find the knock sensor in 1996 mercury villager knock sensor is in valley of engine, remove intake for access. However, I would never repalce it because it can't cause a problem.
where is the knock sensor on a 1996 Mercury Villager DO NOT CHANGE THE KNOCK SENSOR EVER. waste of $600 http://groups.yahoo.com/group/villagerquest/
...knock sensor error. Replaced egr valve vacuum hoses, check engine light off. Knock sensor error still showing. Heard it was a glitch in the internal monitors but cannot find info on this. Do you know ...
...And as far as changing the nock sensor. how hard it is? thanks in advance, -randy never, ever replace a knock sensor go here for help & join the group
...knock sensor on this van. Can u please give me a detailed message as to its whereabouts The Knock Sensor is located in the block, below the lower Intake manifold....Here are two pic of were it ...
...is a Knock Sensor 1 Ckt Malf in Bank 1 or Sensor 1 You're problem is in Bank One, more than likely an O2 sensor...I'd go to AutoZone or your parts store and ask for a print out on these
...1996 Mercury villager The "knock sensor" works like a microphone, and is a part that seldom goes bad. They do, rarely, and can be purchased at your local auto parts store. Please state the SYMPTOMS ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
