Questions & Answers for: Ford 12 volt relay

Question about 1996 Windstar

1 Answer

...relay that supplies 12 volts when the ignition is on isn't switching any more. The 12 volts is interrupted when the ignition is off to prevent children (or non-thinking adults) from running the ...

Ad

Question about 1996 Windstar

2 Answers

...12 volts to ststarter Starter relay? forget the 12v boy racer light,put a drop tester on the battery and you will find it has no reserve amperage.its the amps that do the work not worrying about some ...

Ad

...meter to test the circuit, open and closed. tip you can pull the relay out and use xternal power to test it. a 9 volt will open and close most all 12 volt relays. hope al of this stuf helps. ...

12 volts at the plug connector for the blower but "0" volts. Could it be the relays or I noticed 2 other electronic devices (one looks like a circuit board bolted into the plenem. The other may be the

Question about 2004 Freestar

1 Answer

12 volts must be present on the Brown wire that exits the relay...From there the Brown wire goes to one side of the Inertia switch and exits the switch on a Red/Yellow wire...With the key on +12 volts

Question about 2001 F250 Super Duty Super Cab

1 Answer

12 Volts. If you are measuring Voltage to the Relay without the engine running, the main battery cables must be wrong. But one of your batteries must be shorted because two X 12 Volts is 24 Volts, not

Question about 2001 Focus

2 Answers

...volts, if the green/yellow wire does not have 12 volts then the multi-function switch is bad. If there is 12 volts on the green and yellow wire with the high beams on then the high-beam relay is

12 volts to the Pump? i had the same problem, its the fuel pump relay, pull the relay, pop off the plastic top, insert a shim so that the points are always touching, the other thing it could be is the

...does not work the relays and fuses are good the charge is good the relays and fueses are getting 12 volts I have not checked if there is 12 volts going to the compressor The plug on the compressor ...

Question about 2007 Explorer

1 Answer

...12 Volt probe {google it} can be a cheap checking tool for this. If 12v volts is switched when button is pressed {could be earth being switched if it is then place probe on constant 12 volts and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2004 Ford F150
2004 Ford F150

2,636 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...