During midway installation of hp inkjet printer series 3500 from cd the instalation stopped.computer is telling that the driver has stopped working

Hi
HP Deskjet 3500 serie --
There could be a Software issue or hardware issue --
1) To check the software issue
Print a Test Page -- from the computer
2) To check the hardware
Press the Power button to turn the product on.
Press and hold the Power button
Open and close the front cover four times.
Release the Power button. The self-test will print
and it it is printing the hardware is fine ...
3) Then you can check by changing the USB Cable connection

The softwware can be downloaded from here

http://support.lexmark.com/index?page=answers&startover=y&locale=en&userlocale=EN_US&productCode=&segment=DOWNLOAD&question=lexmark+3500#1

HP has one of the best driver download pages on the web, make sure you get the correct one downloaded (Operation system type must match yours too). then in the device manager and add a printer button remove all printers,Restart the computer and click the driver file you downloaded.Note: If the printer is using a USB cable do not connect the usb cable until prompted during the new driver install.
gd lk
E

I’m happy to help further over the phone at https://www.6ya.com/expert/eric_ab7c09ec01841771

reload the cd and let the wizard guide you back thru setup !! If that doesn't work go to the HP website for assistance with your printer problems Good Luck swampratt200

Hi Jing,
Try to download the software from hp.com click the link for the same.
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&dlc=en&cc=us&product=428800〈=en

Thank U

Hi,
Here's a link to the driver download for HP 3840:
http://drivers.softpedia.com/get/PRINTER/HP/HP-Deskjet-3840-Series.shtml

Hope this helps

Chris (ziraffa)

Did you plug in the printer before you installed the drivers from your installation CD? If not, you need to uninstall the hp printer drivers and unplug the usb cord from the computer.
Restart your computer, run the installation cd, and then after the HP installation says it's complete then plug the usb cable into your computer. NOTE: Some HP driver installations ask you during the install to plug in your printer so the software can find it. If thats what happens then only plug in your printers usb cable when the installation software tells you to. Once it detects your printer the installation will continue. Make sure you keep hitting next or continue until the software tells you everything is installed. Now your all in one printer should work.
Wilcocoop

for the first part you can check the printer manufacture website for drivers.
visit the hp site

hi johnboy

you can download the driver from here hp 1018
select your windows to download .


riz.

lost my cd for the printer, install the hp deskjet printer directly.