I need the slicing blade with gear for a Rival Mfg. Co. food slicer, Electr-O-Matic, model 1101E-2. My email is [email protected]. Howard
Try on amazon, click here and take a look: Amazon com Rival food slicer blade. I hope this was helpful. Cheers
Http://www.abtecparts.ca/cRival_slicer_1101.htm
This place appears to have parts
I HAVE FOOD SLICER, DROPPED MOTOR. CAN IT BE REPLACED? SERIAL# 65301 MODEL # 1101E/5 125WATTS 120VOLTS 50-60 HZ A.C.
I need nut to secure blade for Model 1101/ 8 dose any one know how to find one [email protected]
I have an Electr-o-Matic model 1101E-2 in good condition for sale OR POSSIBLY FOR PARTS (VERY REASONABLE PRICE). All parts and in tact. Email me at [email protected] and I'll send pictures.
I need the slicing blade an gear for a Rival MFG. Co. food slicer model 1101E/7. If you can get me any info on replacement parts for this particular model, please email me at [email protected]. Thanks, Joy
I picked up a 1101-102 at a garage sale, appears to have all parts except the blade. I would be glad to sell it for the $5 I paid for it to anyone who wants it for parts...
[email protected]
The Rival 1100 series Meat / Cheese slicers where the best! Now Rival only offers plastic models, hard to clean and are junk!
I pick up these Meat slicers all the time, Used naturally but in great condition! I sell them as parts and complete running units, I have in stock right now several models, most will interchange some if not all the parts. I sell on Ebay also, you may contact me there at black_pearl_trading_co copy and paste that into the EBay search on thier site, you will find me. Now I don't always list parts or Slicers... so contact me for a current list of parts or units.
I have parts for an rival 1101e2 my food tray broke and i cant find a replacement, so i am selling mine for parts if anyone is interested. it is complete other than that. i dont have a manual. my e-mail [email protected]
Http://abtecparts.com/Rival_slicer_1101.htm This site has blades, washer (thrust), square nut etc. Check you model number before ordering.
Hey Larry Allin if you still have parts for model 1101e3 I need a blade. Its a great slicer that I use for my jerky primarily and I hate to lose it. My email is [email protected] if you could please contact me
Availability is spotty; email [email protected] for up-to-date availability of parts for model 1005 through 1030 and 1101.
×
WHAT DXO YOU CALL THE MODEL 9705
Want to Buy new or used-[must be working good] motor gearbox units for older all metal meat slicer. Unit has metal 1-1/16" X 2-1/8" tag rivited to metal chromed case w/ printing- Electro-O-Matic, Food Slicer 1101E, 115volt .7amp dc- .8amp ac. Contact, [email protected]
How to clean and grease the food slicer
Contact me at [email protected] for a pdf copy of the owners manual
×
What a great site. I am looking for some feet and an extra blade for mine. I have used this thing for the last 20 years and I found it at a garage sale in new shape for 20 bucks back in the late 80s and while I do not have any problems with it so far, some day it is going to need some parts and a blade. For a smaller home slicer it sure has been a good one. The only thing I had to do is find a new spring so the blade held a little tighter, as the old one got weak and the blade would wobble on tougher meats.
I am diabetic and I use it for everything. I slice my bread into 1/8 and 1/4 inch slices to loose some of the carbs by making the slice very thin, and I still get to make sandwiches, cheese toast and stuff on a shingle. My favorite bread is sour dough and I can get 50 slices out of a loaf. I owned two of the plastic ones and the slices are terrible and all over the place if you set it for thin and I had a great big one that worked great, but it took up half the counter and cost a fortune. Oh well, I have said enough. It is a high quality unit and worth keeping in tip top shape.
Thanks for all of the posts and leads on where to get parts. Cheers!den
Looking for a 6.5" Blade for a Rival Electric Food Slicer
Model 1101 EC/3
[email protected]
I have a rival 1101e-2 slicer by rival. no blade but willing to sell parts if needed.have manuel and everthing else except blade. [email protected]
I will be listing a Rival Food Slicer in very good condition on Ebay in a few days. Model 1101E-2
Sometimes parts are available on eBay; set up a search to automatically notify you when it is listed. Currently, there is a complete 1101 listed; perhaps you could buy it and sell the parts you don't need.
I now provide new rubber suction cup feet for Rival Protect-o-matic and Electr-o-matic food slicer models 1030V, 1025V, 1101E and Rival manual slicer models 1000, 1005 and 1010 as well as other brands and models with rubber feet that screw into the bottom of the unit to keep it from moving around and scratching the work surface. These are no longer available from Rival or the small appliance parts houses I've checked; however, I have found a source for NEW replacements that work very well; these are black rather than gray that was used by Rival. Being new production means the rubber is supple and hasn't begun to deteriorate, they will outperform and last longer than used or NOS (if you could find them) parts. Email [email protected] for details
I also now have eplacements for the thumb nut used to secure the blade; look different but work well. email [email protected] for more information
I am once again parting out a Rival slicer and have some desirable part to offer. As of 9/1/11 the following parts from a 1101E/3 are available: -6.5" blade -idler gear -washer -motor screw -motor; runs strong - plastic and chrome housing -food grip, aka spur clamp, aka food pusher -thickness regulator New, function replacements continue to be available as follow: - suction cup feet, in sets of four - thumb nut to secure blade; sorry, no blade stud, just a nut. [email protected]
In addition to the new suction cup feet I offer for most Rival 1101, 1005, 1010, 1015, 1020, 1025 and 1030 slicers, I also now offer blade washers. These are friction-reducing Mylar washers that mount between blade and blade head (backing plate) and are functional replacements for Rival part number 854-023. Mailto:[email protected] for more info.
I now offer replacement blade washers for Rival slicers; these are newly manufactured, functional replacements. They fit between blade and blade head to eliminate metal-on-metal contact to reduce wear. Mailto:[email protected] for details.
Though it looks nothing like the original part; I now offer a replacement thumb nut that works fine. If you have lost your orginal and can't find an exact replacement, the solution I offer will make your slicer useable again.
×
I need a blade for my rival meat slicer it's a model 1030 v6 plastic gears on back broke sinkmers@ people pc . com
51 bucks are you crazy i paid 5 for it at a garage sale
16,763 views
Usually answered in minutes!
I talked with Rival service dept. at 1-800-3239519. They don't make my part anymore; hope this is helpful. Howard
I am looking for the blade for rival model 1101E/5, and the manual.
Please email [email protected] .
Thanks,
cp
I have the same slicer and I need the washer on the inside of the blade and the square center bolt. I do have two blades, but I will go to a machine shop and have this bolt repaired. The washer just came off the collar of the square bolt. Gunner
I need a Rival Mfg. Co. food slicer, Electr-o-matic, model 1101E-2, slicing blade with gear. Can't find one on-line or from the manufacturer.
Call Mitch Abbotts Business Machine he can repair your gear 858-268-0435. for about 18.00
i need a phone number or address for services dept to get my Referbished models 1101e my email [email protected] 541 399 3275 or nearest servics dept
I recycle parts from dismantled Rival slicers and have some newly manufactured parts as well. I may have what you need for models 1005 through 1030 and 1101. New parts (suction cup feet and blade-washers) are always available; recycled parts availability is variable. mailto:[email protected]
How do i take the blade off the slicer
BUSCO EL ENGRANAJE DONDE VA EL MOTOR QUE MUEVE LA HOJA DE CORTE MODELO 1101E/7
×