Hi,
I bought a new 40" LCD last night & when I connect my Foxtel box from scart to component (Direct to TV and via amp), I get 'mode not supported'.
Please Help!
Resetting the TV
If the buttons on the remote AND the buttons on the TV case do not work (channels do not change and you cannot open or navigate the menu), the TV has stopped responding. Reset the TV as follows:
NOTE:
Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time.
1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.
hope this may help;
Regards,
VOTIT
DON'T FORGET TO RATE:
579 views
Usually answered in minutes!
New receiever,new tv, new Foxtel box and no sound coming through receiver
Just bought a new RCA LED LCD TV and when conected to Direct TV box keeps telling me no signal
×