We have the lg tromm wm2277hb the washer is not draining after the wash cycle and it makes a humming noise, gave an oe code after about 15 minutes. What can we do?

Follow the link for help diagnosing this error code http://www.lg.com/us/support/product-help/CT10000010-1337714738535-oe

if the machine fails to spin and makes noise there are thee things to check .if it fails to drain the water check if something is stuck on the drain pump no 2 turn the drum with your hand and check if the drum is moving freely if not something is stuck between the drum and the housing if the bearings are faulty the machine spins but makes alot of noise towards the end of the cycle i hope this will help you.

OE: Drain problem took longer than 10 minutes to drain

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

IE: Water level (246) was not reached in 8 minutes
UE: Imbalance: Load too small, too large objects between tubs
OE: Drain problem took longer than 10 minutes to drain
FE: Overflow issue drain pump running to comp
PE: pressure sensor (sensor out)
dE: door error. open door. switch is out
LE (with a a slash in the
middle of L. Upside down F) Thermistor out
CE: Over amping Too much soap wrong soap
LE: hall sensor shorted/destroyed from sudslock
bE: Ball sensor loose connection/out of order
EE: eeprom out test mode only
PF: power failure momentary interruption of shocktricity

Service notes and manual

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

An OE error presents if the washing machine has not successfully drained the water in ten minutes. Follow this link for step by step instructions for correcting the OE error code.

The FixYa Team

Hi,
Here is a tip that I wrote that gives more detail about how to fix the OE code on LG washers....

LG Washing Machine OE Error Code
heatman101

Hi dear.As I know there is a OE code on LG washers,if it's Check the followings.OE is drain fault.Check your machine filter there must be blockage(Coin,pin,fluff etc.)clean it.Also check for any kink on drain hose.I hope that helps.Thanks.

Take the front off and check all the hoses going in and out of the drain pump.

oe means drain error (outlet error)
Poss causes:
drain hose kinked,
filter blocked,
pump impellor blocked.
Hope that Helped
Please Rate Me
George

The motor sensor has failed and needs to be replaced.  You will need to call a qualified LG technician to repair this problem.