How do I delete a speed dial number - Clarity Ameriphone JV35

Please go to "Menu"-> "Settings"-> "Call settings" -> "Speed dial"->Select a number -> "Options"->"Edit", then select a contact number.

you must do this for every speed dial number you wish to delete!

Easy as...

1. In the phone, press the Menu key.
2. Click View Speed Dial List.
3. Click a contact or phone number.
4. Perform one of the following actions:
   • To change the contact that is assigned to a speed dial key, click Edit. Click a new contact.
   • To assign the contact to a different speed dial key, click Move. Roll the trackball to move the contact to the new speed dial key. Click the trackball.
   • To delete the contact from the speed dial list, click Delete.

Speed Dial Keys
The fax number and other data for a particular destination can be programmed using a 3-
digit Speed Dial Number. This feature allows you to transmit a document to the
particular destination by pressing the Speed Dial Key, entering the 3-digit number and
pressing the START Key. You can program a fax number in any of the 100 Speed Dial
locations, number 001 to 100.
Entering
1 Press the PROGRAM Key and scroll through the
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
2 Press 2 or scroll down to the Speed Dial menu and
press YES.
3 Enter the number of the location you want to
program and press YES.
4 Enter the Telephone number you wish to transmit
to and press YES after checking to see its OK. If
you want to enter the sub-address, press the Down
Arrow Key.
5 You can press sub-address up to 10-digit.
REGISTERED! KEEP?
OK=YES (EDIT/DEL=NO)
EDIT *DELETE
-SELECT&PUSH”YES”-
DIAL REGISTRATION?
YES / or 1-6
2 SPEED DIAL?
OK=YES
SPEED DIAL =_
OK=YES
OK=YES (SUB= )
SUB=_
OK=YES

Edit/Deleting
1 If you wish to change any entry, a screen allows you to accept or change.
2 If you wish to change a Key that was previously
programmed, this message appears. Press YES to
keep this location as is, or NO if you wish to edit it.
3 If you choose NO, use the arrow keys to select
either EDIT or DELETE and then proceed with the
needed changes.
Group Dial Keys
Instead of their regular functions, any of the One-Touch Keys can be used as Group Dial
Keys. Destinations already stored for One-Touch, Speed Dial can be entered in a Group
Dial Key. Each Group can contain up to 50 locations.
Entering
1 Press the PROGRAM Key and scroll through the
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
2 Press 3 or scroll down to the Group Dial menu and
press YES.
3 Press the One-Touch Key you wish to use.
4 Press YES to accept your selection.
NAME=_
OK=YES
REGISTERED! KEEP?
OK=YES (EDIT/DEL=NO)
EDIT *DELETE
-SELECT&PUSH”YES”-

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Create speed dial entries for fax numbers that you use frequently. The number of speed dial entries you can set up depends on the HP device. For more information, see the specifications for the HP device.
To manually create a speed dial entry 1 In the HP Solution Center, click Settings, point to Fax Settings and Setup, and then click Fax Speed Dial Settings. 2 Click New Entry. 3 In the Speed Dial Settings - New Entry dialog box, type a name and fax number, and then click OK. 4 In the Speed Dial Settings dialog box, click Save. The entry is stored on the HP device.
Note If you are creating a speed dial entry for a networked HP device and you are unable to save the entry, another user on the network might have accessed the same speed dial. Wait a few minutes and try to save the entry again. To create a speed dial entry from the Address Book 1 In the HP Solution Center, click Settings, point to Fax Settings and Setup, and then click Fax Speed Dial Settings. 2 Under Address Book, click Select From. 3 In the Address Book dialog box, select one or more names, and then click OK. 4 In the Speed Dial Settings dialog box, click Save. The entry is stored on the HP device.
Note If you are creating a speed dial entry for a networked HP device and you are unable to save the entry, another user on the network might have accessed the same speed dial. Wait a few minutes and try to save the entry again.

How do I delete speed dial numbers previsously set on norstar phone

NEW Number

Function
72
set
1
press destination like 01 the yellow part of the keyboard
enter fax number
set
enter name
set
stop

Delete a number?

press as above like 02
press clear
set
press clear
press set
stop

I believe what you want is at the bottom of this list.

If you frequently send faxes to the same group of telephone numbers, you can assign these numbers to a group.
Only Speed Dial and One Touch numbers can be assigned to a group. A maximum of 25 Group Numbers (WorkCentre Pro555) / 50 Group Numbers (WorkCentre Pro575) can be assigned (in the range 1-1999). Preset group numbers can also be used for polling.
The following information is included below:

• Create a new group
• Add numbers to an existing group
• Delete numbers from an existing group
• Delete an existing group

To print the Group Phonebook, see the Related Items below for additional information.
Create a new Group:

1. From the Standby Mode, press the [Menu] (up arrow) button on the Control Panel, then press [3], [3].
2. Use the numeric keypad to enter the Group Dial number (1-1999) you want to assign to this group.
3. Press the [Enter] button. The screen will display a name.
4. Use the numeric keypad to enter the Group Name (20 characters maximum), then press [Enter].
5. Press the One Touch button you want to include in this Group, or enter the Speed Dial number, then press [Enter].
   
   NOTE: The One Touch and Speed Dial numbers must already be programmed. See the Related Items below.
   
   
6. Repeat step 5 to enter additional numbers.
7. When you have entered each number you want to include in this group, press [Enter].
   
   NOTE: Group Transmissions are easier if a group is linked to a One Touch button.
   
   
8. To assign this group to a One Touch button, press the One Touch button. To skip this step, press [Enter].
9. Press the [Exit] or [Stop] button to return to the Standby Mode.

To add numbers to an existing Group:

1. From the Standby Mode, press the [Menu] (up arrow) button on the Control Panel, then press [3], [3].
2. Use the numeric keypad to enter the Group Dial number (1-1999) you want to assign to this group.
3. Press the [Enter] button.
4. Press [2] to modify this group.
5. Use the numeric keypad to enter a new group name, then press [Enter], or press [Enter] to retain the old name.
6. Press the One Touch button you want to include in this Group, or enter the Speed Dial number, and then press [Enter].
   
   NOTE: The One Touch and Speed Dial numbers must already be programmed. See the Related Items below.
   
   
7. Repeat step 6 to enter additional numbers.
8. When you have entered each number you want to include in this group, press [Enter].
9. Press the [Enter] button.
10. Press the [Exit] or [Stop] button to return to the Standby Mode.

To delete numbers from an existing Group:

1. From the Standby Mode, press the [Menu] (up arrow) button on the Control Panel, then press [3], [3].
2. Use the numeric keypad to enter the Group Dial number (1-1999) you want to assign to this group.
3. Press the [Enter] button.
4. Press [2] to modify this group.
5. Use the numeric keypad to enter a new group name, then press [Enter], or press [Enter] to retain the old name.
6. Press the One Touch button you want to delete from this Group, or enter the Speed Dial number, and then press [Enter].
7. Press [1] to delete this number.
8. Press [Enter] to delete the number, or press the [Exit] or [Stop] button to exit without deleting number.
9. Repeat steps 5 through 7 to delete additional numbers.
10. When you have deleted each number from this group, press [Enter].
11. Press [Enter].
12. Press the [Exit] or [Stop] button to return to the Standby Mode.

To delete an existing Group:

1. From the Standby Mode, press the [Menu] (up arrow) button on the Control Panel, then press [3], [3].
2. Use the numeric keypad to enter the number of the Group you want to delete, then press the [Enter] button.
3. Press [1] to delete the group number.
4. Press the [Exit] or [Stop] button to return to the Standby Mode.

Related Items:> See AlsoHow To Print and Read the Group Phonebook Report
> See AlsoHow To Modify the Default Resolution and Contrast Settings
> See AlsoHow To Assign / Modify Speed Dials in the Phonebook

clear the fax memory from service setup, will resolve the problem happy faxing omnipresent.

I have done it. I have found a way to chance the speed dial settings on my Samsung D900i.
The following instructions work for my phone but I cannot guarantee they will work for everyone else.
YOU WILL NEED A PEN AND PAPER.
Press Menu > select Phonebook > Speed dial (4) >Select
You should see names assigned to the numbers.
Decide which speed dial number you want to change e.g. 2 Mum Mobile (remember the name)
Press Back > Contact list (1) Select
Type in/go down to that name e.g. Mum Mobile (WRITE DOWN PHONE NUMBER BECAUSE YOU ARE ABOUT TO DELETE IT)
Press Options > Delete (5) > Select > choose Yes > Back > Speed dial (4)
You should now see that Mum Mobile has been replaced with a big number 2. This means that speed dial number 2 is un-assigned.
Press Back > Contact list (1) > Select
Decide who you want to be assigned to speed dial 2 (WRITE DOWN PHONE NUMBER BECAUSE YOU ARE ABOUT TO DELETE IT)
Press Options > Delete (5) > Select > Yes (HERE IS THE WEIRD THING)
Press Back > Create contact (2) > SIM (2) >Select
Type back in the name and number of person you have just deleted > Save > Back > Speed dial (4)
You should see that Speed dial 2 is now the person of your choice.
HOW COOL IS THAT!!!!!!!!!!
Press Back > Create Contact (2) > Select > SIM (2) > Select
Type in Mum Mobile and Number (THE FIRST NUMBER YOU WROTE DOWN) > Save.
That is it, repeat the instructions until you have all the speed dials of your choice.
Hope this helps the many frustrated D900i users out there.

Hi Menu => Contacts =>Speed dials. Good luck.