Resetting frozen tomtom910

If your MC3300 scanner is frozen on a white background with a blue Motorola symbol and says MC33X series, you can try a soft reset to see if that resolves the issue. To do this, follow these steps:

1. Hold down the power button until the scanner turns off.
2. Wait a few seconds, then press the power button again to turn the scanner back on.

If the scanner is still frozen after attempting a soft reset, you may need to perform a factory reset. Please note that performing a factory reset will erase all data on the device and return it to its default settings. To perform a factory reset on the MC3300 scanner, follow these steps:

1. Press and hold the power button and the volume down button simultaneously.
2. Keep holding both buttons until the scanner vibrates and the Motorola logo appears.
3. Release both buttons.
4. Use the volume buttons to navigate to the "Factory Reset" option, and then press the power button to select it.
5. Confirm that you want to perform a factory reset by selecting "Yes" using the volume buttons and pressing the power button to confirm.
6. Wait for the scanner to reset and restart. This may take a few minutes.

If a factory reset does not resolve the issue, you may need to contact Motorola's customer support for further assistance.

Can you explain a bit more in detail?

There is no reset button. The reset is performed by the power button, Press and hold for 6 seconds to reset the device.
Here is the manual
http://www.kocaso.com/manuals/M9300/M9300_User_Manual.pdf

You can try 2 things:

1)Soft reset - clears memory and restarts program
2)Hard reset - deletes all saved data and settings
Soft reset

-Locate reset button to right of USB port on bottom of phone
-Press reset button with stylus
-Wait
Hard reset

-Press and hold both talk and end buttons
-Press reset button with stylus while holding talk and end buttons.
-Release talk and end buttons and press enter

How to Troubleshoot Frozen HTC Touch

Try doing a reset.

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Try "resetting" it.
The reset button on your nuvi will switch the device off. The reset button can be used to switch your device off if the screen is frozen and you are unable to switch the device off by the power button.

To reset a nuvi 2xx:

1. Look at the bottom of the device
2. Locate the small circle with a dot inside (very small)
3. Press the circle to reset the device.

To reset a nuvi 3xx or 6xx:

1. Lift the antenna
2. Locate a button with the word Reset inside
3. Press the button to reset the device.

The device will now switch off.

The reset button on the back will NOT erase your favorites. That would require a hard reset (wipe user data) to do that.

- Jim

You will need to reset the device.
1. On the silver faceplat, under the word "Garmin", there is a tab. Remove the silver-ish fram carefully by pulling on the tab with your nail then by the sides.
2. once removed, press the reset button.
3. Once reset, the unit should work properly.

First, do a reset:
http://www.tomtom.com/support/index.php?Language=4&query=reset&FID=7134

If no result, do a hard reset:

1. Hold reset button pressed for approx 15 sec
2. Press power button while pressing reset button
3. Release reset button while still pressing power button
4. Device should start, hold power button pressed until you see white text on screen, last line should read "RTC..."
5. Release power button

Complain to Tom Tom ,you may have a lemon,look for law suit soon