Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

My Fisher & Paykel GWL11 will not drain. It completes the wash cycle without problems (fills & agitates), but after wash it stops a beeps every second continuously. On the Wash Progress monitor, both the rinse and spin lights are on. The lid lock light is not on. Do you think it is the lid lock solenoid or would it be the pump?

1 Answer

Anonymous

Master 3,917 Answers
Posted on May 25, 2011

Anonymous

Master

Joined: Mar 19, 2009

Answers

3917

Questions

Helped

916145

Points

11199

Hi,

Sounds like you probably have a bad diverter valve or diverter valve is clogged with debris or has failed. The diverter valve on a fisher paykel washer moves the water from the drain hose port to the motor.

To access the diverter valve tip the washer back and look in the back right corner. The valve is held into position with two small hose clamps. A wire connection snaps into position on the valves terminals.

Please get back to us if you have further query else please accept the suggestion.
Thank you for contacting fixya.com

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Fisher & Paykel GWL11 will not complete full cycle, and beeps with wet clothes and water in the tub. The drain pump runs, but drains water very slowly.

This machine will beep and stop washing when the load is out of balance. Have you tried removing the clothes and lying them in again (carefully) and pressing the START/PAUSE button to complete the wash?

Read full answer

Jun 05, 2020 • Fisher Washing Machines

0helpful

1answer

Replaced water pump and control panel, have power, but just beeps.

Fisher and Paykel GWL11 Top Loading Washer

ths.gardenweb.com > Home Forums > Laundry Room

Mar 5, 2008 - My GWL11 Top loading washer has had nothing but problems! ... 4) (Rinse Phase) Drain the water, then lock the lid for spin. ..... I plug the power cord in and I have nothing on the control panel. ..... As the controller was only replaced early in January, I've flicked F&P NZ an email to see if it's still under ...

How to repair a Fisher Paykel Washing Machine

www.instructables.com/.../How-to-repair-a-Fisher-Paykel-W...

InstructablesI removed the pump and control panel, found no blockage in the pump, so far ... Ihave just tried to fill my F/P machine but the water is just dripping in. ... I have aFisher Paykel washer have replaced the control module and now it .... washing machine MW612, stopped working and displayed beeping sound every second.

Read full answer

Jan 16, 2016 • Fisher and Paykel GWL11 Top Load Washer

0helpful

1answer

Fisher and Paykel GWL11 Top Load Washer starts but drum won't turn, it twitches and beeps then turns off with solid beeps

Hi ken
Can you turn the bowl & agitator by hand.
If it can't turn by hand, Your seal & bearings need replacing.

Read full answer

Feb 01, 2013 • Fisher and Paykel GWL11 Top Load Washer

0helpful

1answer

Fisher Paykel GWL 15 Rotor Position Sensor

Does It just shake bowl left & right, it will soon give you fault code 56.
Well its a board problem you will need to get technician to fix this board, three resistors(R129,R130,R131) need to be changed for a 1MegOhm resistor.