Question about Computers & Internet

2 Answers

I just bought a TP-Link router. I was told to change my IP address because my internet provider's IP is 192.168.2.1 instead of 192.168.1.1. How do I change my IP address?

Posted by on

  • dualism04 May 02, 2011

    Which Operating System?

  • What operating system are you running at the moment? Is it Microsoft Windows, Linux or MAC?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Computers & ... Master
  • 301 Answers

Before going to change TP-Link IP Address follow this http://bit.ly/2U4ZO4n

Steps To Change TP-Link IP Address follow steps.
Go to Network from Left Side menu.
LAN settings-
LAN Type - Static IP
IP Address- change the IP Address in this box.
configurer tp link en mode repeater
Re-open WiFi Router with the new IP address and proceed for repeater mode configuration.
TP-Link WR841n Range Extender Mode Setup
Now to configure the device in repeater mode need to change the mode first.
GO to Operation Mode option from left side vertical menu.
Operation Mode- Choose the Range Extender and press the Save button to apply settings.
tp link tl wr702n konfiguracja repeater mode
The device will take a few seconds to turn into repeater mode.
Connect Host AP from Repeater device
Now go to wireless option to scan your main Wifi router.
Wireless- Connect to Network
tp link tl-wa901nd repeater mode setup
Press the Scan button and wait to get the all WiFi name running on your place.
Find your WiFi name and press Connect button as shown below image.
tp-link universal repeater mode wpa2
You will revert back to the main option, where SSID and Mac address will fill.
Now type your main wifi password to connect from range extender device.
How to Configure my Range Extender
Press the Save button to apply settings.

Posted on Aug 26, 2019

Ad

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 3 Answers

Log in to router via browser at: 192.168.1.1
At login and password promt enter
login: admin
password: admin

Navigate from left pane: Advanced setup -> LAN
Enter there you'r new ip: 192.168.2.1
Subnet mask: 255.255.255.0

Save

Posted on May 02, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to set up my router with modem?


Connect the router to the modem with an ethernet cable, CAT 5, 6 or 7. Try amazon.

Jul 19, 2016 | TP-LINK Computers & Internet

1 Answer

I have a TP LINK router, it transmit signal properly. the problem is when the 3G USB internet modem is fixed into it, it does not send internet signal so the laptop shows TP Link signal: excellent, but no...


To solve your problem:
go here
http://www.tp-link.com/us/article/?faqid=92

Basically what you have done is plugged it in but did not set up the router on a static or dynamic IP address.

Once you have established the IP address of the router and it is recognized by your ISP device (DSL, Cable, Satellite modem ....etc etc.) then you have to decide which device will be the DNS server and assign IP address to all the wireless devices that connect to it.


Lots of things can be wrong. You need to follow the steps on the set up link i gave you properly and in the correct order

Oct 23, 2013 | Computers & Internet

1 Answer

Cant access tp link tlwr340g gui


Unplug the modem network cord from the router, make shure nobody need internet access at the time.

Then access the 192.168.1.1, and it should be the router.
In the Router GUI, change it's address to somethign else.
(192.168.1.X) where X= something between 2 and 254)

Save settings and plug the modem back into the router.

Nov 01, 2012 | TP-LINK TLWR340G Wireless Router

1 Answer

Possible ip conflict


Sounds more like a bad ethernet cable or bad port on the Iomega. Try using a different cable

Jul 20, 2017 | Iomega 1TB Home Media Network Hard Drive...

1 Answer

Im using a tenda wireless broadband..my problem is i cant get the right pre-shared key pls help


Reset your router back to it's factory settings by holding the reset button for about 5 seconds. I have provided a list of the most popular router brands. If it does not work you may need to google what your specific model's default IP address/default username/default passwords are, for example search for "Encore ENHWI-2AN3 default IP address" The default login info can change, it can depend on where you obtained your router. If you purchased it yourself from a store then the standard defaults should work. If you obtained your router from your Internet Provider you may need to contact your service provider. It also may depend whether it's an old or new model router as well. And you may need to press and hold the reset button on your router several times before it actually clears. Make sure you have a wired connection then once you have accessed your router simply run the Setup Wizard. Set your SSID as something you'll remember like "Mavericks Network" and your Password can be something like your phone number for example 3109876543

Belkin - Username: Leave the field blank Password: Leave the field blank Default IP address is: 192.168.2.1

Buffalo - Username: root Password: Leave the field blank Default IP address is: 192.168.11.1

D-Link - Username: admin Password: Leave the field blank Default IP address is: 192.168.0.1

Encore - Username: admin Password: admin Default IP address 192.168.1.1

Linksys - Username: admin Password: admin Default IP address 192.168.1.1

NetGear - Username: admin Password: password Default IP address will be: 192.168.0.1 or 192.168.1.1

TP-Link - Username: admin Password: admin Default IP address 192.168.1.1

TrendNet - Username: admin Password: admin Default IP address 192.168.10.1

Zhone - Username: admin Password: admin Default IP address 192.168.1.1

Zyxel - Username: admin Password: 1234 Default IP address 192.168.10.1

Sep 07, 2011 | TP-LINK Tenda W311R WirelessN Router AP...

1 Answer

I keep getting the error 323. I forgot my name and pass to the router and i cant get on the internet through 192.168.1.1 because its not admin i changed that to. can u help and tell me what to do. i have...


Reset your router back to it's factory settings by holding the reset button for about 5 seconds. I have provided a list of the most popular router brands. If it does not work you may need to google what your specific model's default IP address/default username/default passwords are, for example search for "Encore ENHWI-2AN3 default IP address" The default login info can change, it can depend on where you obtained your router. If you purchased it yourself from a store then the standard defaults should work. If you obtained your router from your Internet Provider you may need to contact your service provider. It also may depend whether it's an old or new model router as well. And you may need to press and hold the reset button on your router several times before it actually clears. Make sure you have a wired connection then once you have accessed your router simply run the Setup Wizard. Set your SSID as something you'll remember like "Mavericks Network" and your Password can be something like your phone number for example 3109876543

Belkin - Username: Leave the field blank Password: Leave the field blank Default IP address is: 192.168.2.1

Buffalo - Username: root Password: Leave the field blank Default IP address is: 192.168.11.1

D-Link - Username: admin Password: Leave the field blank Default IP address is: 192.168.0.1

Encore - Username: admin Password: admin Default IP address 192.168.1.1

Linksys - Username: admin Password: admin Default IP address 192.168.1.1

NetGear - Username: admin Password: password Default IP address will be: 192.168.0.1 or 192.168.1.1

TP-Link - Username: admin Password: admin Default IP address 192.168.1.1

TrendNet - Username: admin Password: admin Default IP address 192.168.10.1

Zhone - Username: admin Password: admin Default IP address 192.168.1.1

Zyxel - Username: admin Password: 1234 Default IP address 192.168.10.1

Sep 07, 2011 | Linksys WRT54G2 Wireless Router

1 Answer

All D-Link Dir configuration done but I can't access internet,why is that?


Reset your router back to it's factory settings by holding the reset button for about 5 seconds.
I have provided a list of the most popular router brands. If it does not work you may need to
google what your specific model's default IP address/default username/default passwords are, for
example search for "Encore ENHWI-2AN3 default IP address" The default login info can change, it
can depend on where you obtained your router. If you purchased it yourself from a store then the
standard defaults should work. If you obtained your router from your Internet Provider you may
need to contact your service provider. It also may depend whether it's an old or new model router
as well. And you may need to press and hold the reset button on your router several times before
it actually clears. Make sure you have a wired connection then once you have accessed your router simply run the Setup Wizard. Set your SSID as something you'll remember like "Mavericks Network" and your Password can be something like your phone number for example 3109876543

Belkin - Username: Leave the field blank Password: Leave the field blank Default IP address is:
192.168.2.1

Buffalo - Username: root Password: Leave the field blank Default IP address is: 192.168.11.1

D-Link - Username: admin Password: Leave the field blank Default IP address is: 192.168.0.1

Encore - Username: admin Password: admin Default IP address 192.168.1.1

Linksys - Username: admin Password: admin Default IP address 192.168.1.1

NetGear - Username: admin Password: password Default IP address will be: 192.168.0.1 or
192.168.1.1

TP-Link - Username: admin Password: admin Default IP address 192.168.1.1

TrendNet - Username: admin Password: admin Default IP address 192.168.10.1

Zhone - Username: admin Password: admin Default IP address 192.168.1.1

Zyxel - Username: admin Password: 1234 Default IP address 192.168.10.1

Sep 06, 2011 | D-Link DIR-600 Router

3 Answers

How to configure my tcp/ip TP-link access point


The router has both a "WAN" (Wide Area Network) side
and a "LAN" (Local Area Network) side.

On the WAN side, most ISPs (Internet Service Providers) will provide the values for IP-address, subnet-mask, and gateway.

On the LAN side, you should just use the "default" values.

Connect your computer via an Ethernet-cable to the router,
and the router will supply values to your computer,
so that your computer can communicate with the router.

Nov 06, 2009 | Computers & Internet

3 Answers

Router ip address problem


Try the following in a command prompt (which is opened by clicking the start button and typing cmd):

ipconfig /release
ipconfig /flushdns
ipconfig /renew

This should remove any old IP address your computer had and request a new one from the router.

Best of luck!

Feb 18, 2018 | D-Link DI 1135C-3/TP (DI-1135C-3/TP)...

Not finding what you are looking for?

Open Questions:

Computers & Internet Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...