Shaun white skateboarding for the wii there is a glitch in the second mode, trying to do a manuel. I bought the game twice and still nothing it does the same thing. It goes black screen for a second the the voice taking starts over again. Is there a way to fix it

It could be the controller is not working anymore and you need a new controller or the controller needs to be resync again and there is also a connection issue too.

First turn on the little box you plug into the usb of the wii,then turn on board after make sure the wii sencer bar is also able to pick up board as well the red light will flash just let it go and should work make sure the blue lights are on on the board.

Hi there - this appears to be a bug, but in fact is not. In the "maintain your manual" challenge, if you drop the manual (meaning, losing your balance and having the skateboard drop back down to 4 wheels on the ground) the challenge simply resets to the beginning with the clock resetting to 2 mins. Rock back and forth on the balance board to keep your balance. As long as you maintain it for 50 yards, the screen will not go blank and you will pass the challenge! If you drop the board back down before 50 yards, the screen goes black and the challenge resets.

Hi there - this appears to be a bug, but in fact is not. In the "maintain your manual" challenge in district 2, if you drop the manual (meaning, losing your balance and having the skateboard drop back down to 4 wheels on the ground) the challenge simply resets to the beginning with the clock resetting to 2 mins. Rock back and forth on the balance board to keep your balance. As long as you maintain it for 50 yards, the screen will not go blank and you will pass the challenge! If you drop the board back down before 50 yards, the screen goes black and the challenge resets.

I had the same problem. I turned the WII so the dongle/sensor that comes with the game is facing the skateboard with a clear line of sight between the dongle/sensor and skateboard. Now it's able to calibrate. Hope this works for you.

does the specification of your PC meet the games minimum requirements? Some eMachines do not have the best graphics cards.
the minimum specs are
OS: Windows XP/ Windows Vista/ Windows 7 Processor: Intel Pentium D Dual [email protected] GHz / AMD Athlon 64 X2 3800 Memory Ram: 1 Gb Hard Disk Space: 8 GB Video: 256 MB @ ATI Radeon HD 2600 / NVIDIA GeForce 8600 GT Sound Card: DirectX Compatible DirectX: 9.0 Keyboard / Mouse

IT TOOK 1.5 HOURS TO SYNC UP AND CALIBRATE A NEW TONY HAWK RIDE SKATE BOARD WITH A Wii.
THE ON-LINE DIRECTIONS AND TROUBLESHOOTING = SUX!.

PLEASE FOLLOW THESE DIRECTIONS IF YOUR HAVING THE SAME ISSUE:
1) Remove skateboard battery's for 1 minute
2) Reinstall 4 new/fully charged AA Battery's in the Tony Hawk RIDE Skateboard.
3) Plug the Tony Hawk Wireless USB Dongle into the "upper" WII USB Port,
Turn on the WII,
Insert the Tony Hawk Ride game disk
Keep pressing A on the WII Controller till you get to the Error Screen saying:
*Unable to SYNC up the skateboard with the WII*
4) Make sure the WII and the plugged in wireless USB Dongle are laying on the floor in front of the wireless skateboard "sideways" with the wireless dongle towards the right side of the WII.
5) The directions state to 1st press the wireless USB dongle reset/Sync button, then the so called Start button on the board, which did not work 100 different times.
6) Instead (on the side of the board) all 4 of the blue LED lights were on. Now press and hold the button which is the Start/Home/blue little house/C- looking Button on the side of the board for 5 seconds. The Blue LED lights should now all be off!
7) Now press the WII Wireless USB Dongle reset/Sync button.
8) After the Dongle sync

IT TOOK 1.5 HOURS TO SYNC UP AND CALIBRATE A NEW TONY HAWK RIDE SKATE BOARD WITH A Wii.
THE ON-LINE DIRECTIONS AND TROUBLESHOOTING = SUX!.

PLEASE FOLLOW THESE DIRECTIONS IF YOUR HAVING THE SAME ISSUE:
1) Remove skateboard battery's for 1 minute
2) Reinstall 4 new/fully charged AA Battery's in the Tony Hawk RIDE Skateboard.
3) Plug the Tony Hawk Wireless USB Dongle into the "upper" WII USB Port,
Turn on the WII,
Insert the Tony Hawk Ride game disk
Keep pressing A on the WII Controller till you get to the Error Screen saying:
*Unable to SYNC up the skateboard with the WII*
4) Make sure the WII and the plugged in wireless USB Dongle are laying on the floor in front of the wireless skateboard "sideways" with the wireless dongle towards the right side of the WII.
5) The directions state to 1st press the wireless USB dongle reset/Sync button, then the so called Start button on the board, which did not work 100 different times.
6) Instead (on the side of the board) all 4 of the blue LED lights were on. Now press and hold the button which is the Start/Home/blue little house/C- looking Button on the side of the board for 5 seconds. The Blue LED lights should now all be off!
7) Now press the WII Wireless USB Dongle reset/Sync button.
8) After the Dongle sync

From Activision website: Disconnect the wireless dongle from the usb port on the back of your Wii. After about 15 seconds the board should turn off and no lights should be illuminated.

you have to hold the power butten down till it connects go to http://activision.custhelp.com/