F23 - Washing Machines

Maybe u need to get it fixed

Display shows an error code - Front-load washer ' Whirlpool ...

https://www.whirlpool.com/...error-code...w...
Whirlpool Home AppliancesCheck the following answers for error-code related issues you can correct: ... Duet SportTM washer - F01, F11, F23, F24, F27, F28, F29, F30, F31, and F33.

What does error code f23 flashing mean on a Whirlpool ...

no difference

Seems that your heater has failed. Check continuity of the element, wiring to the element and test the voltage from the controller panel board .
Click this link: error codes

It was being showing f12 before I disconnecte the wire on elements now is writing f23 and showing spans

I have the same problem with my Kenmore F23 code will not bake but the broil works?? What the heck?

F23 is a pressure switch error.

error code f23

F23 that it indicates a leak into the base of the appliance.

You'll need to unplug the appliance and take the rear cover off.

Check for a spillage and if there is an anti flood device in the base, ensure it's reset/working or replace it.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question@@@@

HOW TO FIX WHIRLPOOL WASHER F23 ERROR CODE What does F23 mean on whirlpool washer? It means there is a heater failure. If the water temperature in the washer fails to reach 86 degrees or higher then the washer will give the F23 error code. To fix the whirlpool washer f23 error follow the steps listed below.
Note: Some models do not have a heater as shown below, some models just have a temperature sensor. If your model does not have a heater just skip to checking the temperature sensor.

1. First unplug the washer.
2. Check the wiring to the heating element make sure its not burned, broken or corroded.
3. Check the heating element for continuity of course if it does not have continuity then replace the element.
4. Check the water temperature sensor wiring for corrosion or breaks.
5. Remove the wiring harness from the temperature sensor and measure the resistance of the sensor. Refer to the chart below and if its out of range replace the sensor.

see link below for details and where to buy the part which is under $80 and fairly easy to replace
How To Fix Whirlpool Washer F23 Error Code Appliance Repair Guides