There are several pages that explain dispenser programming. This is on page 10 of the owners manual. Water Filter Status Light (on some models) The water filter status light will help you know when to change your water filter. When the water filter status display changes from "GOOD" to "ORDER," this tells you that it is almost time to change the water filter cartridge. Replace the water filter cartridge when the water filter status display changes to "REPLACE." If water flow to your water dispenser or ice maker decreases noticeably, change the filter sooner. The filter should be replaced at least every 6 months depending on your water quality and usage. After changing the water filter, reset the status light by pressing and holding the FILTER button for 3 seconds. The status light will Changing the Water Filter 1. Press the eject button to release the filter from the base grille. 2. Pull the filter straight out. 3. Turn the cap counterclockwise to remove it from the filter. IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with the replacement filter. 4. Align the ridge on the cap with the arrow on the new filter and turn the cap until it snaps into place. NOTE: You can run the dispenser without a filter. Your water will not be filtered. Simply insert the cap all of the way into the base grille and rotate the cap until it is firmly in place. 5. Remove the covers from the O-rings. Be sure the O-rings are still in place after the covers are removed. 6. Push the filter into the base grille. The eject button will pop back out when the filter is fully engaged. Water Filter Status Light: The water filter status light will help you know when to change your water filter. When the dispenser control panel's water filter status display changes to "ORDER," this tells you that it is almost time to change the water filter cartridge. Replace the water filter cartridge when the water filter status display changes to "REPLACE." The filter should be replaced at least every 6 months depending on your water quality and usage. NOTE: If water flow to your water dispenser or ice maker decreases noticeably, change the filter sooner. After changing the water filter, reset the status light. Details: Pressing and holding RESET FILTER starts the 3 seconds countdown. Using the dispenser cancels the countdown AND no dispensing is permitted. The number '3' blinks 3 times and the 'invalid' tone sounds 3 times and user has to release both the pad and the button and press the button again to start it over After 3 seconds, the BLUE WATER BARS in the Icon flash and an audible tone sounds 3 display screen. See figure 16.
change from "REPLACE" to "GOOD" when the system is reset.
7. Flush the water system. See "Water and Ice Dispensers."
times. When the system is reset, the "ORDER" and "REPLACE" icons will disappear from the
Note: Users can reset the filter status at any stage.
If you should need the complete and exact model number and manual with parts manual you will need to enter the Model Number here=> I've got a side by side Whirlpool refridgerator. - sea_breeze_132.jpg/images/sea_breeze_132.jpg" alt="sea_breeze_132.jpg" class="h_mi" /> Manuals, Guides and Instructions Please rate this solution, Thanks, Sea Breeze
User manual click HERE
The water filter status light, located at the top of the refrigerator
compartment, will help you know when to change your water
filter cartridge.
Style 1 - Standard status light (on some models)
When the water filter status light changes from green to yellow,
this tells you that it is almost time to change the water filter
cartridge (90% of the filter life has been used). It is recommended
that you replace the base grille water filter cartridge when the
water filter indicator light changes to red OR water flow to your
water dispenser or ice maker decreases noticeably. See
"Changing theWater Filter Cartridge" later in this section.
After changing the water filter cartridge, reset the water filter
status light by pressing the light switch 5 times within
10 seconds. The water filter status light will change from red to
green when the system is reset.
If you need Adobe Reader Click=> Adobe Reader X (10.1.0) (50.25 MB)
If helpful please rate this solution, Thanks Sea Breeze
Click Photo Below for User Manuals
1,199 views
Usually answered in minutes!
×