I turn on my Viewsonic PJD6251 but the lamp does not come on, and after a few seconds I get 2 red lights TEMP and LAMP. It is new, only 2 weeks I barely used. Good care.

Does this projector have an automatic timer that doesn't allow it to turn on after a set number of hours (@ 1000)? If so, you may need to re-set the lamp-hour clock (as if you changed the lamp even though you didn't). Some machines require you to at least slide open the lamp cover to make it think that you changed it.

Sounds like the lamp is bad. If you take it out, look to see if it is broken or if there is a bubble on the lamp. If either of these is the case, buy a new lamp. If it's not the lamp, it's the igniter and if it's only 3-4 months, it's still under warranty and that should be fixed.

Clean the unit and make sure no dust is clogging the air to the lamp.

it seems that there ate 3 reasons for it
1,the lamp is failing
2,the lamp ballast is failing
3,the motherboard is failing
We supply original projector lamp,bulb,parts,Lcd panel,Lens,DMD chip,color
wheel,motherboard,powersupply,ballast... with high quality and competitive
price.
any questions, feel free to contact me
have a nice day!
Jerry,Lampdeng Limited

Viewsonic PJD6251
Original lamp, Unit price is USD100
any questions, feel free to contact me
We supply original projector lamp,bulb,accessories,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price.
have a nice day!
Jerry,Lampdeng Limited

Did you buy and OEM Panasonic lamp in a Panasonic box?

replaced the lamp

first step to take:
refer to the user's manual to find: How to replace the lamp?
and second replace the lamp. www.andrewselectronics.com. prefer original ones.

Yes this is the signal for a bad lamp. Other things can cause this. 1. Look at the new lamp. make sure it still looks good. not broken with little glass pieaces in it. 2. When you turn on the tv, put your ear to the lower back part of the tv near the middle. Listen for the start up of the color wheel (a low high pitch sound only at the start up of the motor). If this is good you will here a ticking sound only if the lamp dose not light.

Now with all this info. If the lamp lights (as seen from the back of the set) and goes out after a few seconds and you did not here the color wheel spin up, the color wheel is bad.

If you here the color wheel spin up and no ticking sound, the Ballast is bad.

The ballast part no. 939P978010

The color wheel is not avialable from Mits. You will have to replaced the light engine. It cost to much. Just buy a new tv.

Refer to owners manual ! Blinking indicates the type of fault that is occuring on all your tv sets. example : power light on red - indicator light beside it green but blinks rapidly for half a second rapidly then shuts off. This refers to a faulty lamp or a lamp that is near its expiration. Read your manuals if indicators refer to easy repair sweet, but if it says call tech then bummer...