I have an apex ld3249 tv with remote. The remote died a couple of days ago. I have had the tv for 6 weeks. A universal remote will not work. A new Apex remote is $60. Is this going to be an ongoing problem with this tv? Should the remote be covered under the 1 year warantee? If so how do I get it replaced?

The Comcast Universal remote codes for Apex Digital are:
0748
0765
0767

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Hello
Universal remote codes for Apex TV with AT&T Uverse remote are:
1085, 1111, 1119, 1163, 1256
OK

You can download a user's manual and others from;

http://safemanuals.com/user-guide-instructions-owner-manual/APEX%20DIGITAL/LD3249-_E

Click on the pdf icon on the right part of the page.

On uverse i got my apex to program by doing the search of codes. There is a code you can enter then hit a button to sequence through all codes by hitting power i believe. when tv turns off you know you have the right one. I am having the same issue on directv now since it does not have this option.

You will need book to set codes or search (google) for your uni remote codes for what device you are trying to work. The main thing to remember is to switch modes when wanting to work something. Like press tv mode button when using tv or dvd mode when dvd is being used, etc.

Hello! Sometimes the remotes have trouble programming to the tv. But follow the simple steps by following the link below to run a scan on your remote to get the correct code so that it will work the tv. Hope it helps.

http://www.dishnetwork.com/SupportSection/power-scan-instructions


Becki Barned
DISH Network Customer Service

You can power scan for the code.
Turn ON the electronic device you want to program the remote to control.
Press the Mode button( sat,tv,dvd,aux) on the remote until the appropriate mode light is flashing.

Press the Power button. The mode light will stop flashing and stay lit.
Press the Up or Down arrow button to set the remote to the next code. The Down arrow button scans backward and the Up arrow button scans forward.
When the correct code is reached, the device (whether a TV, VCR, or other) will turn off.

Press the pound key button to store the code in the remote control memory. If the code is valid for your remote, the mode light will blink 3 times.
Turn the device back ON by pressing the Power button.
Press sat mode key once you power back on the tv to be able to operate the receiver box.
Try some other functions to make sure you have the correct code. Occasionally the Power button may work when others do not.
If the other buttons work you are finished.

.
If the other buttons do not work, repeat the previous steps. The scan will resume from the last code stored.
The mode light will flash rapidly when the scan has returned to the starting point and all codes have been tested for that mode. The remote control may not control some device models.

There is a issue with Apex Digital LD3249 TVs. I too want to program to a universal remote, but am unable to do it with a Philips brand universal remote. I am going to try another brand. I have heard that some of the universals out there are old enough and does not support the newer made TVs. BH

We have the same tv and the same issues. I've tried new batteries, it's been like this since we bought it. I also cannot find a code that will work with the tv on a universal remote or the direct tv remote. It's frustrating. Anyone else found a solution?

hi! i have here one code for your APEX tv, just try it 1088, hope this helps!!!! goodluck!!!