Hello Dwight, thank you for your inquiry!
From my understanding you need helps installing the side seals on your Frigidaire dishwasher, FGCD2456. If your seals have been properly installed there may be another gasket causing the internal leak. Is it coming from the corner of the sides? This could be a possible issue with the lower door gasket or the door itself. I would check to make sure it is properly sitting on the hinges and not adjusted incorrectly. You may need to have a professional technician out to perform a proper diagnosis. Hope this help you with your repair. -Matt
It is so common that the drain leaks in many ways and
is the most problematic fault in a washing machine. In all occasions it is
important that your observation is most important and so is vital to the
identification /rectification and solution. If you have noticed that water has
leaked then as the drain hose pump/valve and fittings are located on the
underside of the machine it is important that you look for possible leaks here.
In some cases the drain hose would be clogged at the drain end to outlet of the
house and so there will be back flushing resulting in overflow to the outside.
Also the drain pump/valve can be clogged or the drain hose clamps can be loose
on the grip which can all cause the leak to occur. Removing and cleaning the
drain pump/valve, tightening of the hose is also very important. Also water can
leak if there are gaps on the front door gaskets and must be checked but this
will happen only during the cycle and not on the drain cycle end.
Tips for leak: http://www.espares.co.uk/advice/washing-machines/a/7/1461/do-you-have-a-leaky-washing-machine.html
Replacing Door seal: http://www.espares.co.uk/advice/washing-machines/a/7/1464/how-to-replace-the-door-seal-on-a-washing-mac.html
Check for tips on the link below to identify parts and
removal:
http://www.espares.co.uk/advice/washing-machines/a/7
359 views
Usually answered in minutes!
×