At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I'm not exactly sure what your question is from what you wrote, but if you're looking for either the new controller or info on its installation, contact Traeger directly: https://www.traegergrills.com/support
Does the fan and the auger both work? There is a short somewhere. If those are GFI circuits it is tripping, it could be just a little dirty (greasy) at one of the connections.
Make sure you are leaving it open long enough when you first turn it on. Everything in the smoke chamber needs to burn up before you begin. There also may be grease buildup in the bottom of your smoker that is catching on fire. If neither of these two possibilities work, contact Traeger support https://www.traegergrills.com/support
Unfortunately the Xbox 360 will need to be professionally repaired.
These red light errors usually happen with little warning. Sometimes you may see strange colors or it will start to freeze, however often times it strikes without warning.
The main cause of the red light errors is overheating. In the future try to keep the console in a well ventilated area and always play with the console standing upright rather than laying flat. When the Xbox 360 lays flat the entire bottom surface area gets very little air flow, causing the console to run much hotter than if it is upright.
If your warranty is up or you just don't feel like dealing with Microsoft; the company I work for GATpro Repairs offers a flat rate repair service. We even pay for return shipping. Let me know if you have any further questions.
Good Luck!
Hank
GATpro Technician
Permanently may not be possible with the xboxs thermaldesigns or rather short comings .
longer lived 1-2 years extra trouble free life I believe is
attainable with the right procedures and clamping hardware
and a better heat-sink.
Some unit run hotter than others so evan know it's the
same fix it my not last as long.
Anyway 99.99% of the problem is the G.P.U. un-soldering itself from the main board . When the
chip is re-flow (re-soldered) back to the board and properly clamped that tends to yield the most
durable repairs .also some supplemental cooling
is a plus to keep the unit from overheating .
There to much to say , on the matter but that's
the basics.
This is a pretty common problem in the 360 and sometimes it will act a little crazy with errors like "please put into a 360 console", or it thinks games are dvds and just says "play dvd" after putting a game in. This is usually caused from the laser which is either dying out not getting enough power. You can either fix it yourself which will void the warranty, or send it in to get fixed which will cost around $100 for a new drive.
first open up the dvd drive and clean it good, including the laser. Then try the dvd drive POT Tweak if you decide to get a new laser, then click here for instructions on how to install it properlly.
If you don't want to get a new laser or do the pot tweak, you can get a replacement drive on ebay or somewhere. It must match the key stored on the motherboard, so you would need to taked the pcb board out of the old drive and put it into the new one for the keys to match.
×