I just assembled my Barnett Quad 400 and was hoping to **** the bow but it seems my safety latch and trigger are jammed. Any suggestions?

Question edited for clarity.
Question moved from Cars and Trucks to a Crossbow Category.

You do need to shoot 20 inch moon nock arrows out of it.

https://www.crossbownation.com/threads/horton-crossbow-questions.13798/

https://www.google.com/search?q=Horton+Hawk+SL+bolt+length

..

Check to make sure that everything is tight. If the bow is sited in then more practice will be required.

Barnett says it all. terrible quality problems lately. Could be anything. I suggest return it and for youth bows the atomic bow is the best at best price. Made by bowtech diamond line.

Ebay seller has them.

The four rubber grommets where the string is attached to the limbs need some DRY lubricant. When drawing, the grommets 'slip', and that slip 'plucks' at the string creating the creaks. Keep applying dry graphite to these points and the bow will quiet up nicely.

This is called delamination. Contact Barnett and they will repair or replace for free. lifetime warranty.

Hello, sounds like a nail is jammed in the chamber. Happens frequently. What you do first is disconnect the gun and empty any nails. Then, with a screwdriver or a big nail hit the ram driver back down . Reconnect and test by depressing safety latch and pulling trigger. Repeat. Hope this helps. -ROB

There is a fix
Do you remember the last thing that happened before your problem started?