My ifb machine is around 10-12 years old. It is SUPREMO DX Fully Automatic Model. Presently it is not completing the washing program and gets jam in between. One technician of IFB has checked it around 15 days back and had detected some spares require replacement. Since than he has not turned again. We are facing lot of problems for washing clothes. After sales service of IFB is not up to the mark. Please help.

Look for two key pad buttons with a line with a smiling child face padlock symbol. Press and hold these two buttons until you see or here a response from the washing machine.

On a 8 Kg model, press and hold + and - Change buttons on the right of the LCD screen simultaneously for several seconds? That's the way to toggle the child lock on and off for this IFB model, https://www.amazon.in/IFB-Fully-Automatic-Senator-Aqua-SX/dp/B00LAXLN5C . On a 6Kg machine, https://www.amazon.in/IFB-Fully-Automatic-Diva-Aqua-SX/dp/B071G3B81W/ref=psdc_1380369031_t3_B00LAXLN5C , the appropriate buttons to hold are the Rapid Wash and No Cold. (These are on the right side of the control panel but to the left of the power button.)

Depending on the machine, the time to hold the buttons may be 3 seconds, 5 second or 10 seconds. You should see and hear some response. However, holding the key pad buttons for too long may re-enable the child lock.

I hope this helps. The child lock on most washers remains active even when the power is removed from the machine. This keeps the program from being activated when you clean the control panel or by a child who shouldn't access the machine. If the problem persists, I suggest checking for a problem with the keypad wiring or contacts.

Cindy Wells

http://www.fixya.com/support/t26923901-ifb_elena_dx_model_after_complete_wash

your question is very vague
and little info to go on

no description of the fault you have

no info other than a maker and model

so ... post a better question
for a more fully answered question...!!

In IFB Machine LO Error Code indicates Low Voltage Problem. We have the best quality Automatic Voltage Stabilizers. Gelco Automatic Voltage Stabilizer GA400 model will solve your problem. GA400 Voltage Stabilizer to up or down your incoming Voltage from GEB. It has a capacity of 12 amp and 15 to 20 Voltage up / down capacity.

We are sure this Gelco GA 400 model will solve your problem.
You can Call on: 9722658052 or 9427347880
Thank You

idonot have the manual which has been actually lost i am new to this machine iwant to know the working of program knob

What is the model number of your unit?

Hi from retired Englishman in SW France,

I'm so sorry but we at the FixYa washer forum do not give that sort of advice- we help people identify what technical/mechanical/electronic faults they are suffereing from and what to do about them.
My advice, though, would be to have a look at the label on your curtains as it should tell you. If there is no label, identify what material they are made of and check in your manufacturer's washer manual. If you do not have a manual here is how to obtain one ;-0)
???
Manual
You will need to type into your search engine/web browser '(make model number) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount.
You could also try the manufacturer's web site direct ;-0)

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.