Question about JVC HD-52Z575 52" Rear Projection HDTV-Ready Television

2 Answers


I have replaced the lamp with a part from an authorized JVC dealer and the same condition exists.

What else could be causing this problem.

I cannot do any on screen solutions seeing I do not receive a picture.

Thanks for the help.

Posted by on

  • 6 more comments 
  • fulbku Aug 16, 2008

    Have the same problem

  • respect2nd Aug 20, 2008

    these tv's are ****. i'm having the exact same problem.

  • CARLO SALERNO Sep 28, 2008

    I do not see a solution or reply to my original inquiry. Why did I get an email saying there is another solution to my problem?

    Please advise. Thank you.

  • bigfish0047 Oct 10, 2008

    I have same problem but for months I was getting a message right after turning on TV, it said lamp needs replacement. I ignored it and now Im getting the flashing LED and power light. I was gonna go ahead and change the lamp but now after reading some of the other comments I not sure what to do. Is there anybody out there who know what this problem is and how it can be fixxed? I would gladly pay for some worthy advise.

  • pcurry18 Nov 14, 2008

    Does anyone know how to fix this issue? Mine just quit and the lights on the front blink really fast. NO picture

  • xlisakellyx Nov 22, 2008

    I am hoping you can help me out. I have a JVC D-ILA HD-52Z575 television. I went to watch TV the other day and when I turned it on the lamp and power LEDs started rapidly blinking and the fan clicked off after about 3 seconds.

    I called our local JVC service center and they told me that since the TV was about 5 years old (I got it in Jan 2004) it was likely the lamp. So I ordered another lamp and put it in. Once I was sure everything was correct I plugged it back in and turned it on and it was doing the same thing as before. It is rapidly blinking and will not come on.

    Do you have any ideas of what may have caused this? Any help or advice you can offer would be greatly appreciated!

  • pbowers Dec 26, 2008

    Same problem, any help would be greatly apprecaited. Checked the fan and it starts then stops with a "clicking" sound in between.

  • Anonymous Mar 29, 2014

    tv has no red in picture. Replaced lamp but still no red. Could be ballast?



2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 3 Answers

There is a malfunction of the internal electric circuits was it struck by lighting happened to mine

Posted on Jul 11, 2013


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have that same problem...we replaced the lamp and nothing happens we hear the fan go on but it goes of .

Posted on Sep 28, 2008


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Power led and lamp led blink simultaneously on my jvc hd65s998 rear projection tv

You might need to replace your lamp driver, or ballast as some call it. This is what strikes the lamp to make it light.

Mar 20, 2013 | JVC Televison & Video

1 Answer

Lamp turns on lamp light starts blinking then turns off

Check the lamp ballast, it works just like a flourecent light if the ballast is bad it will turn the light off. It comes on a board try searchinng ......ebay or thetvdoctor.comXHRWN5

Feb 23, 2012 | JVC HD-56FB97 HDTV

1 Answer

I have a jvc tv model HD61z575 It just went out and the led lights are blinking fast at the same time I checked the lamp it looks fine any suggestions

Looks can be deceiving. The lamp is gone. I've had the same tv since 2006. Mine just blew out again. Replace the lamp and all will be well.

Jan 02, 2011 | JVC HD-61Z575 61" Rear Projection...

1 Answer

What does it mean when the blue lights keeps blinking when i turn it on

The "LAMP" LED light indication is on or flashing too?Yes,than the Lamp life are over.Must replaced the Lamp.

Nov 27, 2010 | JVC HD-61Z886 61" Rear Projection HDTV

2 Answers

The red and blue light on the front keep flashing when we try and turn the TV was working earlier today.

If Power and Lamp lights blinking 'alternately' it shows problem of temperature arise abnormal and reason could be blocked fan or air flow in tv is insufficient to keep it cool.
If Power and Lamp lights blinking simultaneously then it shows problem with lamp installation, need to inspect lamp cover is fixed in its position securely.
Let me know both lights are blinking at same time on your tv?

Aug 02, 2010 | JVC HD-52G786 52" Rear Projection HDTV

1 Answer

Sony wega kdf42we655 power led blinking red

If lamp light is on at tv front then replace lamp as existing lamp sounds dead/ broken.
Lamp replacement procedure would be written in user manual of tv.
And if lamp light is not on but standby light is blinking then let me know how many times it is blinking to find out problem cause as standby light blinking is an error code.

Mar 25, 2010 | Sony Grand WEGA KDF-42WE655 42" Rear...

1 Answer

JVC HD-ILA Projection TV

From the manual...

and LAMP LED are
• It may be a malfunction that the fan is locked or the temperature has increased.
and LAMP LED are
blinking rapidly
• The lamp may not have been installed correctly, or it may be due to a malfunction.
• The lamp door may not be closed correctly.

continues blinking
• It may be a malfunction of the internal electrical circuits

Feb 16, 2008 | Televison & Video

1 Answer

The power LED and LMAP LED are blinking rapidly simultaneously

Will you will have to replace it now because this is the most likely cause for the blinking lights. Look in the instruction book for the directions on how to remove the lamp. You will find that it has burned out. It is easy to replace. You can order one from JVC or a service center, or a parts distributor.

Dec 03, 2007 | JVC HD-52Z575 52" Rear Projection...

2 Answers

Toshiba 62HM14

What are the labels on the lights? Timer/Lamp/Service and what color is wich?

Jun 03, 2007 | Toshiba TheaterWide 62HM94 62" Rear...

Not finding what you are looking for?
JVC HD-52Z575 52" Rear Projection HDTV-Ready Television Logo

Related Topics:

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

Todd Hill
Todd Hill

Level 2 Expert

433 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides