Question about RCA D52W20 52" Rear Projection HDTV-Ready Television

4 Answers

Beeping noise, tv won't turn on

I have a 52 in rca tv model no. d52w20. the tv has been in good condition since we got it besides having to replace the green projection cannon. this is the 2nd time though that the tv will not turn on and there is a distinct beeping noise when you press the power button on the tv or the remote. the tv sounds like it is getting power but nothing happens. we have fixed this problem before, it was something with the power cord connection box where it connects internally to the tv. is there an easy that i can go out and buy and install myself or will i need a tech to do it or take to the shop? thanks in advance. when tv is pluged in there is no picture and tv beeps. jon

Posted by on

  • glophus Jun 30, 2008

    I would like to find a solution to fix my RCA guide + gold gemstar 52 in tv. when it is plugged in it beeps and the power wont turn on. i was hoping to find a specific part to replace. are there tests that i can run with a volt meter to narrow down the problem? thanks...jon

  • Terrell Shy Jul 22, 2018

    I have a RCA big screen TV and it has a beeping sound when I plug it or try to turn it on

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a RCA big screen TV and it has a beeping sound when I plug it up and try to turn it on
Beeping noise, tv won't turn on - 7_22_2018_6_09_49_pm.jpg

Posted on Jul 22, 2018

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,889 Answers

Chirrping.....is indication of shutdown issue first thing to chech is make sure that the flat ribbion cables foint from the green board over to the power board are in place...this set shuts down for many reasons.. the most likely in your case would probalbkly be a blown horizontal output transistor. which could also mean a blown flyback transformer. If you have some electrical experience i can guide you through this.. Let me know if you want to fix it yourself..

Posted on Jun 30, 2008

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

No chance for testing with out a volt meter sir.

you must need a volt meter to find out the defective component.

Posted on Jun 30, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

Your best solution would be to take it in to a shop. As that is cheaper then them coming out and the job will be done right. If you need any help finding someone let me know. You can also use fixya.com 's homepage and enter your zip code.
Keep me updated.
Thanks,
Lee

Posted on Jun 28, 2008

  • 1 more comment 
  • Lee A.
    Lee A. Jun 28, 2008

    Also give those a shot just to make sure though it seems like you will need to have it serviced as this may be a power issue.
    • The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Front Panel Block in the
    Parental Control menu and press OK to uncheck the box.
    also
    • Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn on again. If this happens frequently, the
    voltage in your house may be abnormally high or low.
    • Unplug. Wait five minutes. Plug in again.
    Keep me posted.
    Thanks,
    lee


  • Lee A.
    Lee A. Jun 30, 2008

    First you want to take the back off and visually inspect all the boards. You can check the capacitors for bulged tops. It is also best to check the bottom of the boards to look for bad solder joints.
    Thanks,
    Lee


  • Lee A.
    Lee A. Jun 30, 2008

    you asked if it was easy and no it is not that easy. You should have experience in it and be fully confident. It will most likely not cost that much to repair. You can call and get an estimate first to see if that is the route you want to take.
    Thanks,
    Lee


×

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know what bulb to order for my RCA HDTV Model #D52W20. Do not know the model number for the bulbs for replacement. Can you help please?


that model doesnt have any replacable bulbs. there are no consumable bulbs or lamps for that model. what is the problem with the tv does it not turn on? that model was notorius for power supply failures where the tv would try to power on and get a green light on front and come on and off 3 times.

Jan 06, 2011 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

Can u help me my RCA TV will not stay on keeps turning off.


Palaboy, where can i buy this part at ? R73 .0087uf h 2000 vdc. the one in red rectangle.

Jan 15, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Our TV appears to be wrapping around toward us. We have a red, green and blue line present when we first turn on the TV. Also, everything is doubled and blurry. Is there hope for my TV?


There are 3 pico fuses beside the flyback tansformer(deflection board), Check for open continuity the one in the middle location# FL231. If open replace it :)

Dec 28, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

61" RCA DLP won't turn on after power blip


Hi, thank you for visit fix ya.
Do you havve problems with power supply capacitors.
Replace this:
2200uf 25V, 220uf 25V ( bowed or vented). Located beside power transformer.
Thank you

Jul 26, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

RCA D52W20 52 in. Rear Projection HDTV power light blinking


Liz, yes it is a power supply problem, better question is; low voltage or high voltage power supply ? count the blink code, it should repeat the code, once you have the code call your local tv shops and give them the model number of your tv and the blink amount and they`ll tell you price to fix, gl, video-tek

Jun 05, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

52 inch RCA - green light turns on & off, BUT no picture


CP150 is a capacitor in the power supply circuit....feel top to
see if flat....change if "pooched" or swollen..................T.

Apr 15, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Rca d52w20 52 in.


That model is famous for the flyback being bad and that will cause a dead set. Let me know if you need more assistance on doing the repair and ordering a new flyback they are inexspensive, and easy to replace.

Apr 12, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

RCA D52W20 52 in. Rear Projection


the main pwr board is defective and will need replacement...

Oct 18, 2007 | RCA D52W20 52" Rear Projection HDTV-Ready...

Not finding what you are looking for?
RCA D52W20 52" Rear Projection HDTV-Ready Television Logo

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...