Hi,
F21 is a motor or control board fault.
This also can be caused by voltage spikes or surges...
To reset it.
Turn the appliance knob to the off or reset position, 12 o'clock.
Turn the knob to the 6 o'clock position.
Press and hold the spin button.
While holding it, turn the knob to the 7 o'clock position.
Continue holding the spin button for about 5 seconds.
Release the button.
Turn the knob to off.
When your turn it back on it should have cleared the error code
If the problem continues then check the motor...
heatman101
1,791 views
Usually answered in minutes!
thanks a million,it took me 4 attempts,but i finally got it to work.i will definately use fixya again.
regards shane
thanks a million,it worked,the wife is now off my back,regards shane
ta worked a treat.rob
×