I have two arced lines on the top of my screen they look green and pink and cause the picture to be blurred. Almost like a 3d image in that area. Bottom of the screen is fine up through the middle and it startsgetting worse the farther up. Any help would be greatly appreciated. I know nothing about fixing these but willing to try anything. Some f the postings are talking about adjusting settings. This just appeared after 6months of working fine. Anybody know if these adjustments might help? THanks, Rick [email protected]
Check that the 3 output plugs are in the right sockets (Red, Blue, Green) There is usually a felt pen colored mark on a white tape on the plug in wires. The Board sockets are marked Red, Green, Blue.
Easyab
180 views
Usually answered in minutes!
Thanks to the many posts on this site I was able to get the ICs and solder them in and the problem went away! I think I might have crossed the red and blue wires leading to the convergence board though. When I use the DVD player the screen is red instead of Blue. Anybody know about that? Is it possible to just plug the wires in the wrong place and the TV still work?
×