Thanks for the post that starts this way:
"I am really glad I stumbled on this site- It enabled me to fix my 3
year old LG WM2277HW washer that had the motor errors described here
(LE error,..."
Can you send me the jpg image/pictures of that you tried to post? It is too small to read. Thanks!
[email protected]
I was also having the LE error problem. I tried removing the unpumped water , tried re-running the load etc....... then I decided to try something else.... just like we have to restart our computers, I thought about resetting the washer so to speak......not sure if it is fixed, I am going to try running another load, but, I UNPLUGGED THE WASHER, LET IT SIT FOR ABOUT 10 SECONDS, THEN PLUGGED BACK IN.... AND THE WASHER WENT THROUGH A CYCLE AND FINISHED.
Great fix it. I saved alot on money today!!!! Only the $20 part. Thanks again.............
Here are some larger versions that should be more readable:
Hello &
Welcome to FixYa
LE error in your LG front load washer is displayed
when either the motor is not working or the control board thinks that the motor
is locked up. A Hall effect sensor is used in these washer which monitors the
speed and direction of the motor and then forwards this information to the
control board. Hope you understand by now that this LE error is displayed when
their is an issue with the motor or when the hall effect sensor sends wrong
signal to the control. Conclusion is you'll have to check both motor and hall
sesor and replace the part# that is bad, usually I have seen the sensor going
bad. Please get back to me if you have any other questions.
Kevin
1,479 views
Usually answered in minutes!
×