At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I'm trying to install a router on my comp but its telling me error 323 something about cant access new router or requierd router to be configurate with user name and password. thx aidil
Tell me when you open the page they ask some of user name and password if yes then give this combination username is admin and password:password or the username blank and password : admin.
second think is that if your isp provider give you a pppoe connection then you have to give the username and password which isp provider give you. try it
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
go to > control panel >network connections > in left hand pane.under Network Tasks..click..Create A New Connection... that will start a wizard and will guide you thru the process. you will also need to install the drivers as well for his computer to be able to use the modem/router. i hope this has helped
You never mentioned at what stage this error is displayed?
Neither Make and Model of the Machine?
Still. let me offer you a generic solution, that might work :-
Type 192.168.1.1 in you browser address box. Username blank & Password is admin.Once
login to the Router setup page, Below setup tab , change the Local Ip
to 192.168.2.1 and click on save settings. Once done sucessfuly. Unplug
the Power from Router and Modem wait for 30sec and plug the Power to
modem first wait for 30 sec and plug the power to linksys router, and
try going online.
Unless, let me know with all the above details i mentioned.
hi
give a staic ip on the comp not the default gateway on lan
connection.
connect the comp to the access point
opent the access point GUI using the address on the bottom of
the access point u have
do the same w/l settings u have on the router and make sure
the security is WEP
then if u want to connect the access point w.l with router
then excange the mac address of each device into each other
if u dont want to make access point w/l to router then there is no need to exchange such mac addressess
then u need to change the ipaddress of the access point in the same range of ur router
then try to connect thru w/l network name and password if any.
you will be able to connect and go online
gud luck
thanx and regards sukhiii
As an initial info try to do a hard reset on the unit, this process will restore the system into a original settings. you can find the reset switch on either on the left of right sight of your router.
or
you may visit this SITE to recover again your current password without erasing or removing the current settings made.
Hi are you trying to install the Router config software . Check to see the Network access connectivity - if its restricted or limited access , if it is so rectify this and login as administrator , also ensure that the IP address or name of your comp is unique.
no dnt ask me for one and they did not give me a password
×