I replaced the black (K) toner cartidge on my OKI C3200, but the printer still won't print and I am still getting the error message "REPLACE TONER 413:K TONER EMPTY." Any suggestions for fixing this?

the best thing to do is buy the original toner. how ever if u really can't then try changing the blue colored one

Ya more than likely they didn't make a drive for your OS.

Yes it can be saved, it is indicating the fuser thermister is open or below temperature. Try opening the printer and restarting it. If that does not fix it you may have to replace the thermister or the fuser

Check our USB cable. It should contain AWG marking on it. Depending on AWG number there is a limit to USB cable length as follows:

28AWG = 0.81 m
26AWG = 1.31 m
24AWG = 2.08 m
22AWG = 3.33 m
20AWG = 5.00 m

Make sure your cable does not exceed the maximum length according to its marking. Replace the cable if it exceeds the length.

There are several reasons for this message... we will start with the easiest to solve. Here is a link:
http://www.katun.com/downloads/oki-c5100tnrcartiis.pdf

Have you tried a new magenta cartidge. I think it has run out, that'swhy you can only print black

Suggest you order a black drum, which may include a black cartridge. Replacing BOTH the cartridge and the drum should solve the sensor problem, then you can swap parts to isolate where the problem is.

Clean the sensor. Reset the printer and that should help you with this error. If thet doesn't work replace the toner cartridge.

Check your page count, drum life on a C3200 is roughly 15000 pages. This information can be found on the information menu map.

Information Menu Menu Item Default Setting PRINT MENU MAP EXECUTE Prints the MenuMap (menu listing) with current settings shown. Information about your printer is also
shown at the top of each MenuMap page.


Life Expectancy Toner Cartridge
Life expectancy approximately 1,500 pages, assuming about 5% coverage, which means that 5% of the addressable dots in an image are printed with this color of toner. See Toner Cartridge..

Image Drum
Life expectancy approximately 15,000 pages, assuming an average of 3 pages per print job. If the average print job is longer than this, the image drums could last longer, but if the average print job is shorter, then image drums will be used more quickly. See Image Drum.

Transfer Belt
Life expectancy about 50,000 letter-size pages. See Transfer Belt.

Fuser
Life expectancy about 45,000 letter-size pages. See Fuser.