I have a men's Citizen Eco-Drive WR 200. Why does my digital time accuracy differ by 2 mins from the analog setting? Thank you, Wayne

I'll need more information about the watch. WR200 is not the model number. It is the depth in metres it is water resistant to.
The serial number is usually engraved on the back plate of the watch. The bit against your skin when you're wearing it. It's the number marked in red in the photo I've attached. Is this a digital watch, a watch with hands or does it have both?
Comment below with the serial number and I'll try to help you more.

http://www.citizenwatch-global.com/support/pdf/e810/e.pdf

www.citizenwatch.com/en-ca/support/setting-instructions/

the video below has an example on how to replace the glass of a watch.

Watch Crystal Replacement

go here for instructions > http://www.citizenwatch.com/en-uk/support/setting-instructions/

you can get instructions in video form from the link below
http://www.citizenwatch.com/en-uk/support/setting-instructions/

you can get instruction off the link below
http://www.citizenwatch-global.com/support/guidhomee.htm

You've gotta go to the set setting, one click out on the knob and cycle through all the timezones using the B button (the lower one) to change all the settings to OF (for winter) or ON (for summer time). According to their website FAQ, they can't determine when daylight savings time goes into effect for all the different time zones so there is no automatic changeover from SMT to normal and back again. Disappointing, I know. I just spent half an hour going through their website looking for some master switchover as well.

You can download a manual here. Any other technical questions you can also find the number to call Citizen.

http://www.citizenwatches.com.au/instruction-manuals

I have the same problem! My WR 200 is always setting the year to 2016, which then fouls up the date. I don't have a solution.