I need a wiiring diagram for a HP MCP61PM-HM motherboard so I can figure out where the power led plug goes and the power switch.
Hi RobPu,
I have searched everywhere. I even entered a chat windows with Compaq & asked for a site to download the manual for Compaq Presario SR5015LA Desktop PC which has the motherboard MCP61PM-HM in it. (Nothing). This board was made by
ECS known as EliteGroup. Still nothing. Forms for the most part do not help, only with drivers. Drivers for the board can be found on Compaq's web site.
http://h10025.www1.hp.com/ewfrf/wc/prodinfoCategory?lc=en&cc=us&dlc=en&product=3411762
But the manual will not download. That's what is needed to hook up the front panel pins to you're case. I even looked for other possible boards who's layout was close to the MCP61PM-HM.
Nothing! I did find other Compaq PC's that also had the same board in it but after looking through the manuals, not one actuallys shows where to plug the front panel LED's on to the board. Why? Because Compaq does not support a user changing out their case for another. There is no money in that.
For the most part RobPu, system boards share some things in common. I am posting a picture for you. This pic is upside down for you so try & work with me here. Hook up you're LED's as shown. This should work for you. Pin 1 is you're starting point.
This is standard for ECS boards even if it's being sold by Compaq. Like I mentioned, for you it is posted unside down.
Try it, I'm sure it will work for you.
Enjoy!
If I can help you further, feel free to post.
Suggestions & comments welcomed.
Mike
The diagram is on the MoBo! Find the CE logo near the PCIEx16 slot. It's in between each one.
Having just encountered the same problem with this board I would like to report that the pin configuration given above is correct.
Enjoy playing a snake game in your browser. You can opt to play the traditional form of snake or one of its numerous contemporary variants.
Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
Thanks, Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
93,080 views
Usually answered in minutes!
I had the same problem this was helpfull, but now I need the specs om the 2.0 usb pins
Same as hes problem, I need a wiring diagram, so I can see where I can put my wiring in :)
Gateway has a similar MoBo. The front panel pinouts are herehttp://support.gateway.com/s/MOTHERBD/Sh...
drivers windovs 7
×