My ps3 wont show the image on my jvc tv. So im wondering how to set up my jvc tv to get it up

You may have a fault in the HDMI cable. Swap it out first.

OK sometimes people put the HDMI cable to the PS3 and it changes the settings. Try to reset the ps3. Turn the ps3 off with just the red light showing. The hold the power button. when it beeps and the light changes keep holding it. then you with hear 2 to 3 beep right after another. When you do let the button go. The does a manual reset and whatever cables you have connected at the time should work. If this doesnt then your video card on the board might be out. I hope this helps you out.

You need to lower the video resolution output of the PS3, it is set too high for he TV to display, It should be set to the native resolution of the TV. Just Google 'PS3 VIDEO RESOLUTION'

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

try to reset your ps3. hold the power button and it will beep a couple of times do this three times. it will reset your system and work as long as you have no other issues

Well you can just use the hdmi cable if you're going both audio and video in to your tv. With your hdmi cable you get the best quality for both.

But in anycase, it seems that your PS3 is set up to output video via HDMI cable. To reset our video output settings, simply power down your PS3 (turned off) and hold down the power button until you hear the second beep. (around 5-10 secs) Power back up and hopefully you'll have video via your av cable. Hope this helps.

Turn off the system, Then when its in standby mode when the red light is on, press and hold the button to turn it on, Wait untill you hear 3 beeps then let go if the system turns off try it again its a master reset then just restore factory settings

Well did you change the setting on the ps3 before you switched to the hdmi cable? sometimes this can pose as a issue. there is a actual setting on the ps3 for this. so I would switch back to the last cables used and then go and switch this in the setup of the ps3 then it should work no problem for you.

av and comp and hdmi all process the a/v differently through the cables sometimes even on my dvd player I have had to adjust this in the setting.

ok i think I understand what you are saying so if im wrong please correct me but I think you should try this if you need further info on how to change the setting let me know and I will dig up the process for you.

hope this has helped

so if you have ever had your ps3 connected to HDMI (HD cable) before, and your forgot to change it back to the normal cords that came with the game (yellow, white, and red) then you will have to connect it back up to the HDMI and go to the Display Settings and change your video output to the one that came with the ps3 (which looks like just one yellow in the settings.) then after you do that then the screen might go black if your HDMI and regular cable are on a deffirent channels, so you turn to the channel that the yellow white and red cable needs to be to, then it will show the screen and ask you if you want to leave it at this setting with this video output/cable then you say yes then your good to go.

You could have the wrong AV channel on your TV to the slot you have you PS3 plugged into your TV with.

Or you colud have set your PS3 to a HDMI setting while using a non-HD TV, I think there's a way to reset this setting on your PS3, check the manual.

First put the orginal ps3 cable onto ps3 then to tv.set tv to see ps3 and go to ps3 setup,now down to display settings,set to hdmi,picture will go off so now switch tv to hdmi input .Next go to sound settings for ps3 and set to hdmi if your amp can work this way ,if not set sound out to optical.
hope this helps.
CABLE GUY.