Hi,
Is
this a new installation?
In
new installations, this error can sometimes present because of a
miscommunication between the control panel and the wash motor. In this
instance, the washer simply needs to be reset.
Step
1: Unplug the washing machine.
Step
2: While the washer remains unplugged, press and hold the [Start/Pause] button
on the front panel for 5 seconds.
Step
3: Plug the unit back in, and run a rinse and spin cycle to test if the LE code
is cleared
Are
there soap suds visible in the drum?
Over-sudsing
is the main cause of LE error codes. Using non-HE (high efficiency) detergents
or too much detergent will cause stress on the motor. In addition, detergent
residue can also cause leaking and odor. Follow these steps to resolved an LE
error code caused by over-sudsing.
Step
1: Unplug the washer and allow the unit to sit for 30 minutes to give the suds
time to dissolve.
Step
2: Plug the washer back in and press [Power] to turn on the washer.
Step
3: Do not choose a washing cycle. Press the [Spin Speed] key until "No
Spin" is selected.
Step
4: Press [Start/Pause] to begin a drain only cycle.
Step
5: After the drain only cycle has completed, remove the clothing items from the
machine. Turn the power back on and select [Rinse and Spin] and then press
[Start/Pause]. This will remove excess soap suds and light residue from the
drum. Repeat this step until no visible suds are in the drum of the washer
Check whether a
large load size been used with a gentle wash setting?
Check whether the
washer been overloaded
Thank You
596 views
Usually answered in minutes!
×