Bosch WFMC 3200 Front Load Washer Logo
Posted on Aug 24, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Some of the lights on the front of the machine do not light up, the buttons when pushed do not light up or seem to work. The washer makes a knocking noise when you first start the machine,the door has to be shut very hard so that you do not hear the knocking when you turn on the machine (sometimes you have to close the door very hard several times), the washer did not rinse the clothes today, I had to manually turn knob to the spin cycle and then it was very slow to turn not really spinning, finally I took out all the soaking wet clothes and rinsed them in my kitchen sink, what a mess!!!Help!!!I need to fix the machine myself as I cannot afford to call the only certified Bosch person in this area is a known dishonest person. I can replace the electronic panels if this is the problem, what do you think???

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 15,935 Answers
  • Posted on Oct 01, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Dec 21, 2008
Answers
15935
Questions
19
Helped
5034572
Points
35540

It appears your timer/main controller/CCU has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My Kenmore Elite washer model 110.27062600 stopped working. All the front panel lights are flashing on and off for 7 times then pauses and starts blinking again. The machine will not do anything. No...

if this is an oasis model. Try pushing other buttons you should get a touch tone (beep) as a good response. if no sound you seem to have a interface problem. not a main ctrl.
5helpful
1answer

The machine's "Control Locked" light is on.

Did you try to push and hold the 'CYCLE END SIGNAL' button for 3 seconds?
0helpful
1answer

The lights go on, but washer will not start.

door not closed try open door and then closing again
1helpful
1answer

Panel Lights on but will not start (just beeps)

Unplug machine, push reset button locate in the owners manuel
0helpful
1answer

Everything seems to work, door locks, but water won't flow

Check the water solenoid valve, it may have failed. A quick test is to use hot wash rather than cold wash. If the hot water works, then your cold water valve has failed.
1helpful
1answer
0helpful
1answer

Light blinking

click this link if you get any error or any light blinking on the pannel and the unit does nor works

http://www.applianceaid.com/frigidaire_frontload_washer5.html

thanks
0helpful
1answer

Duet front load washer

did u try holding the "End of Cycle Signal" button for 3 ?
1helpful
1answer

HE3 Front loader Controls Locked

Try 'end of cycle' pushed down till the light goes off. Or locate the button with diagram of 'lock', & push down till the light goes off.
3helpful
1answer

Kenmore Elite problem

1. Remove the lower panel under the door by loosening the three screws under the bottom edge on the front of the washer. HINT: If you prop up the front feet of the washer with some small blocks of wood, this will make access to the screws much easier.
2. With the screws removed, the lower panel should drop down then come off. If the panel sticks, a light tap on either side will knock it loose.
3. Reach your hand up inside the washer behind the front casing on the right-hand side. This is where the door latch assembly is located.
4. At the bottom of the door latch assembly is a small pull tab. This is the manual release for the door. Pull the tab straight down and the door will come open.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.%^@#
Not finding what you are looking for?

73 views

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...