Anonymous Posted on Aug 22, 2010

My Maytag Neptune will not spins and gives the code nf. I have been told that there is a reset code. Does anyone know the code?

2 Answers

Bruce

Contributor 1 Answer
Posted on Feb 28, 2016

Bruce

Contributor

Joined: Feb 28, 2016

Answers

Questions

Helped

3202

Points

I tried the diagnostic test but it didn't work Maytag MAH6500AWW
to check the nF issue water lines are clear

Anonymous

Master 8,619 Answers
Posted on Aug 23, 2010

Anonymous

Master

Joined: Dec 27, 2008

Answers

8619

Questions

Helped

2149691

Points

26471

Hi

Thanks for using FixYa. Error NF means No Fill. The washer has tried to fill but was unsuccessful. NF indicates No Flow. There is something that is interrupting the inbound flow of water to the washer, either hot or cold. Sometimes this happens when water service in the area is interrupted, creating an air pocket that causing the water valve not to sense water.

Try running the diagnostic test by—

Press the delicates and heavy soil keys together for 3 seconds.
You are in the service mode.
Now, press wrinkle free key, cold water should start entering.
Then, press the cotton sturdy and hot water should flow.
To exit the test mode, either unplug the machine or press the delicate and heavy soil again for 3 seconds.

Please do rate the solution if the issue is resolved or post a comment for further assistance.

Thanks
Rylee

Anonymous Aug 26, 2010

I tried the diagnostic you recommended and it did not work for me. I live in an older house and there is only a cold water line running to the machine. Could this be the problem? Do I need to run a hot water line to make this washer work properly?

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

NF code may tag neptune front loader!

www.fixya.com > ... > Neptune > Maytag Neptune MAH5500B Front Load Washer

Apr 14, 2009 - CODE IN MAYTAG WASHING MACHINE Hello & Welcome to FixYa NF error in yourMaytag is displayed due to no fill condition, when the washer tries to fill but ... SOLVED: Maytag Neptune MAH6500AWW '03 front ...
10 answers
Nov 9, 2016
SOLVED: HOW TO FIX NF CODE IN MAYTAG ...
2 answers
Oct 2, 2011
SOLVED: Machine is flashing nF code
10 answers
Jul 13, 2011
Maytag Neptune MAH9700 Front Load Washer Nf code ...
10 answers
Jun 21, 2011
More results from www.fixya.com

Read full answer

Feb 17, 2019 • Neptune Washing Machines

0helpful

2answers

MAYTAG NEPTUNE WITH NF SYMBOL

Symbol - 'Washer has tried to fill' Check water faucets & hoses for kinks. OR call Maytag 1-800-688-9900. Happy Washing!!!!

Read full answer

Nov 02, 2016 • Maytag Washing Machines

0helpful

1answer

Getting nf from maytag neptune tl washer code

Don't know unit but see if you can get wiring diagram and see where the relay that picks up that cycle. You can just tap them at times to get them to work. Hopefully it doesn't have optic couplers (no relays) cause the that board is bad

Read full answer

Mar 02, 2015 • Maytag Washing Machines

0helpful

2answers

HOW TO FIX NF CODE IN MAYTAG WASHING MACHINE

Hello & Welcome to FixYa

NF error in your Maytag is displayed due to no fill condition, when the washer tries to fill but is unable to nf is displayed. Please check the water inlet valve for any clogs and obstructions, you can also clean the inlet to solve the issue. Please get back to me if you have any other questions.

Kevin

Read full answer

Oct 02, 2011 • Maytag Neptune MAH5500B Front Load Washer

0helpful

1answer

My washer starts and after about 5 minutes gives out... i get an nf code... anyone dealt with this

That's a No Fill error code. Is there any water flowing into your machine?

May be a block in the in the Water Inlet Valve. If it was false I feel you would have to break out the mop for flood/over fill condition. Did you try to fill with a mix like Warm/Warm selction?

If you want to troubleshoot further go to a real DIY forum.

Google this Neptune TL Washer FAV6800AWW

In the Sticky: Neptune TL Washer FAV6800AWW 5 post down you will find a link to the Service Manual. You absolutely need the Service Manual to DIY issues with the machine. It

Read full answer

Feb 16, 2011 • Maytag Neptune FAV6800AW Top Load Washer

0helpful

1answer

My Maytag Neptune will not go into the spin cycle, instead the letters "nf " come on the display. What can I do to prevent this and to have the cycle completed?

Bonnie,

NF = No Fill the control board receives signaling for the washer during the water fill cycle. With most cycles the depth of water is around 3.5 inches in the wash basket. I know a Bulky Wash cycle selection will fill the wash tub to a high fill which is about 7.5 inches of water in the wash basket.

Is the washer filling the machine with any water? Do you hear water entering the machine? If you are doing a cold water fill and there is no or very little water in the wash basket with the NF error code. Try a Warm or Hot fill and see if the machine will fill and start the wash cycle.

Assuming you are doing cold water wash loads. You could have a water line block at the inlet screen or a failed cold water inlet valve which will not open. Try the above and let me know the results..........Rich

Read full answer

Sep 13, 2010 • Maytag Neptune FAV6800AW Top Load Washer

0helpful

1answer

Maytag Neptune Washer Problem

replace the door latch wax motor and check the drain pump for obstructions.

Read full answer

Jun 25, 2009 • Maytag Neptune MAH5500B Front Load Washer

0helpful

1answer

Maytag neptune TL

The machine needs to cut you a break;

“”i have a maytag neptune TL and there are several things wrong with it...1. I can't wash small loads it will stop at the spin cycle and flash dc””

This issue is a clutch issue see this post to DIY the repair.

“”it will wash fine on regular loads until it comes to spin cycle again and it will stop and flash nf””

This one is a little confusing the “nf” error is a No water fill error code. Check these two post for support regarding water inlet restriction or valve not opening properly.

nf post nf post 2

“”my fabric softener dispenser will not let the softener out neither will the bleach dispenser””

See this fabric softer post for support. The fabric softener dispenser may be clogged or the water dispenser valves feeding both dispensers may not be operating properly. The Service Manual on page 16 “Board Output Test” will give you support to turn on the Fabric Softener Valve and Bleach valve. See if you hear the valves operate in Service Mode”

My method may seem a little confusion for viewing water flow to the dispensers. This issue could be associated to the nf error you are receiving, restricted water flow (inlet screen clog) or cold water valve not working properly.

Post back for any questions or possible support I can offer. I’m an owner like you not a repair person but I’m very comfortable working on this machine. Rich

Read full answer

Jun 17, 2009 • Maytag Neptune FAV6800AW Top Load Washer

1helpful

2answers

Maytag Neptune MAH 8700 AWW

NF - No Fill
It means that the Washer does not turn on water valves to fill washer with water.

Try the following steps and the problem should be solved.

1.Is the water turned on?

2.Check inlet hose screens for restriction.

3.Check wire connections in harness leading from machine control board to pressure switch.

4.Check water valve.

5.Check inputs and outputs at machine control board.

Good luck.And please do rate my answer.Thank you.

Read full answer

Jan 17, 2009 • Maytag Neptune MAH5500B Front Load Washer

1helpful

1answer

Getting nf code on final spin cycle

The "nf" code is a "no-fill" fault. This indicates that your washing is not getting water supplied to it, or the pressure isn't substantial enough to complete a fill. You need to, first, make sure the water supply is turned on. Second, if the water IS turned on, and you're still not getting anything to your washer, you may have a fill valve problem. The fill valve is what both your hoses connect to on the back of the machine. It can become clogged with sediment over time (especially, if you have hard water or well water). Turn the water supply off and remove both hoses from the back of the washer. Check both these hose connections for clogs in the filter screens. If they are clear, then more than likely the fill valve has gone bad. I hope this helps you.

Read full answer

Dec 11, 2008 • Maytag Neptune MAH5500B Front Load Washer

Not finding what you are looking for?

View Most Popular

Neptune MAH5500B Front Load Washer

Washing Machines

NF code may tag neptune front loader!

Neptune Washing Machines

3,212 views

Ask a Question

Usually answered in minutes!

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual

. Neptune MAH5500B Front Load Washer...

Neptune MAH5500B...

Have a manual for Maytag Neptune MAH5500B Front Load Washer? Or just drag it here!

Related Topics:

My Maytag Neptune will not spins and gives the code nf. I have been told that there is a reset code. Does anyone know the code?

2 Answers

Bruce

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

NF code may tag neptune front loader!

MAYTAG NEPTUNE WITH NF SYMBOL

Getting nf from maytag neptune tl washer code

HOW TO FIX NF CODE IN MAYTAG WASHING MACHINE

My washer starts and after about 5 minutes gives out... i get an nf code... anyone dealt with this

My Maytag Neptune will not go into the spin cycle, instead the letters "nf " come on the display. What can I do to prevent this and to have the cycle completed?

Maytag Neptune Washer Problem

Maytag neptune TL

Maytag Neptune MAH 8700 AWW

Getting nf code on final spin cycle

Not finding what you are looking for?

Neptune MAH5500B Front Load Washer

NF code may tag neptune front loader!

Ask a Question

Top Maytag Washing Machines Experts

Ronny Bennett Sr.

Brad Brown

ZJ Limited

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

. Neptune MAH5500B Front Load Washer...

Related Topics:

My Maytag Neptune will not spins and gives the code nf. I have been told that there is a reset code. Does anyone know the code?

2 Answers

Bruce

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

NF code may tag neptune front loader!

MAYTAG NEPTUNE WITH NF SYMBOL

Getting nf from maytag neptune tl washer code

HOW TO FIX NF CODE IN MAYTAG WASHING MACHINE

My washer starts and after about 5 minutes gives out... i get an nf code... anyone dealt with this

My Maytag Neptune will not go into the spin cycle, instead the letters "nf " come on the display. What can I do to prevent this and to have the cycle completed?

Maytag Neptune Washer Problem

Maytag neptune TL

Maytag Neptune MAH 8700 AWW

Getting nf code on final spin cycle

Not finding what you are looking for?

Neptune MAH5500B Front Load Washer

NF code may tag neptune front loader!

Related Topics

Ask a Question

Popular Questions

Maytag Neptune Error COde "nd"

My maytag neptune front load washer won't spin all the water out

Model FAV6800AWW will not pump water out if clothes are in machin

Fabric Softener Won't Dispense

HOW TO FIX NF CODE IN MAYTAG WASHING MACHINE

Top Maytag Washing Machines Experts

Ronny Bennett Sr.

Brad Brown

ZJ Limited

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

. Neptune MAH5500B Front Load Washer...