Im getting a uL message on my spin cycle and I dont know why.

ul mean unbalance load try add more are take some item out if the washer makeing a noise when it spin you good have bad bearing

I am having the same problem with Maytag bravos. I have suspension rod kit on order -I will let you know if this fixes the problem.

my respect on the graphic ariston appears error2

I THINK THERE MIGHT BE SOMETHING IN PUMP

UL is unbalance load. uL is displayed when the machine/motor control detects an
off-balance load, and is steady on while the washer runs a
mini-cycle to rebalance the load.
Display clears if mini-cycle successfully rebalanced the
load.If the mini-cycle is unsuccessful, uL will flash until the door
lid is opened, allowing the customer to view and
redistribute the load. Page 57 shows the suspension
rod removal to get the tub out. These rods (4) hold the tub in place. Sorry I do not have an oasis manual but this Bravos manual will give you an Idea. One of those rods could be worn to the point it is throwing the the whole tub off. If a rod is broken then the tub could be pressing against the base and binding the motor, causing that noise. You gonna have to check and see.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hi


Thanks for using FixYa. UL is displayed when the machine/motor control detects an off-balance load, and is steady on while the washer runs a mini-cycle to rebalance the load.
• Display clears if mini-cycle successfully rebalanced the load.
• If the mini-cycle is unsuccessful, uL will flash until the door lid is opened, allowing the customer to view and redistribute the load. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

"UL" means "Unbalanced Load" - make sure the washer isn't overloaded first or if you are doing rugs, blankets, or lots of jeans, split the load. You can also try running an empty or light load and see how the machine behaves.

If you still have the problem, you may have some issues with the drum bumpers, etc., but try the easy things first.

uL is displayed when the machine/motor
control detects an off-balance load, and is
steady on while the washer runs a mini-cycle
to rebalance the load.
Display clears if mini-cycle successfully
rebalanced the load.
If the mini-cycle is unsuccessful, uL will
flash until the lid is opened, allowing the
customer to view and redistribute the load.
CHECK TO MAKE SURE IT IS LEVEL. LET ME KNOW IF I CAN ASSSIST YOU FUTHER. YOU MAY HAVE A BAD CONTROL BOARD.

keep getting a ul code and machine barrel knocks back and forth in the washer on spin cycle until the ul comes up. Cannot get it to quit. What is the problem?
Thanks

being un-level could certainly cause it im currently working on this problem for another customer on this site while i haven't had hands on with this model yet i just finished reading the service manuel on it its kind of an amazing concept in washers if either one of you are on line reply to this message hold my rating for now as i need to ask some questions