Why is smoke coming from Kenwood chef A901

Are you able to rotate the bowl? You know it locks in place if the lid is on because of the safety interlock that goes into the base?

Remove the lid and in the channel, you should see the lock pin rise. If it doesn't jiggle it. You can also press it from the top to help it spring up.

Dont know what the problem is, you didnt say.
Merely take the screws out. Usually on the bottom
of the unit. Heres your big hint, possibly. Some screws
are hidden under the rubber feet.

Amazon.com: Kenwood Mixing Bowl, Stainless Steel Bowl Chef Elite Food Processor Accessories Stainless Steel Bowl Titanium XL SS Bowl 6,7 Liter Silver: Home & Kitchen

Amazon.com: Kenwood Mixing Bowl, Stainless Steel Bowl Chef Elite Food Processor Accessories Stainless Steel Bowl ELITE XL SS Bowl 6,7 Liter Silver: Home & Kitchen

Hi. You have a broken gear in the gearbox either the first motion gear is loose on its shaft or less likely the vertical big gear is loose on its shaft. independent spares for the gearbox are available or complete gearbox

http://www.buyspares.co.uk/chef/km200/catalogue.pl?path=90253,71679&model_ref=440458

The parts that may require service after a very long tim would be the gear box which would require a clean out and refill with grease and the output shafts which can be wiped clean and given a touch if grease as well. The motor bearings could do with the same treatment and all this calls for a strip down of the mixer. However, if there is no perceptable play in the drives and no strange noises, the unit is possibly best left alone with just the minimum lubrication being applied as you intimate.

Hi,
They do not have a manual for the Kenwood Chef A701. However, there is a manual for a Kenwood Chef A701 available for download see www.kenwoodservice.co.uk/instructions/UK/instructions-A701.pdf. There is also some discussion on Martin Lewis' Money Saving Expert Forum see forums.moneysavingexpert.com, about instructions for the Kenwood Chef. I hope this is of some help to you.
Thank You.

You need a traditional whisk mixer like a kenwood chef.
John

I have an Excel that has the D shaped bowl but the base of it is round. Since the Excel does have a round base you can fit any existing bowl onto the Kenwood including their newer stainless steel bowl.

Try Currys partmaster. The have a few different splash guards
Type Kenwood splash guards and they should all come up. They do say which models they fit or not