Kitchenaid Architect Electric range model KESA907PWW02 Error F2E0 STUCK KEY. Can't get rid of this error. Have shut off breaker for several hours -problem comes right back.Any ideas? Thanks M.S.

f5e1 is a door locking error. try shutting off power for a minimum of 2 minutes to reset the control board. If you still get the error replace the latch. Here is the part to order.

Your key pad is shorted.Replace the electronic range control clock.

Need model off range . Pull out the drawer and is on the side of opening

The E1- F5 error is a door lock error.

The control (TIMER) has likely failed in this instance - BUT...

Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.
You should disconnect power again for 15 seconds and reconnect and see if that helps.

If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display.
This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.

Sometimes these work, but if the control has failed it won't make any difference.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.(((((((((

Hello,

The F7 error code on GE ovens indicates either the control has detected one of the key pads on the interface/control is stuck or the clock ( ERC ) itself is faulty.

The first step in determining if it's simply a stuck key pad is to push the cancel/off key ( If you haven't already ). If that fails to clear the error try to shut off the 40amp breaker to the range at the service panel, leave it off for several minutes and upon resetting it the error will either return or the issue was a stuck key pad and you're good to go.

If the error does return after turning the power back on, you'll likely require a new ERC ( clock/timer ) unfortunately.

Hope this was helpful in moving you forward. Thank's for visiting "fixya" today and good luck.

Please take a moment and rate the information provided here accordingly.

macmarkus :)

Sometimes you can get lucky by pressing all keys at random several times each. If that does not work you will have to replace the keypad.

If you've determined the keypad on your Kitchenaid oven, range, or wall microwave is faulty and youre searching for an obsolete part, http://www.FixYourBoard.com has replacements by Ledgestone Technologies. These units are backed with a 2 year warranty. Save your $ and save your oven from the landfill. We have you covered! Call 512-355-1108 for more information and to order. We're happy to help you solve your problem!

The E1- F5 error is a door lock error.

The control (TIMER) has likely failed in this instance - BUT...

Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.
You should disconnect power again for 15 seconds and reconnect and see if that helps.

If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display.
This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.

Sometimes these work, but if the control has failed it won't make any difference.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.^^^^^

I called the salesman where I bought the oven, and he used to be an installer.  Suggested flipping circuit breaker off/on.  It worked, and oven works for now.  However, something must be wrong to require this intervention.  Another web site (www.repair-help.com/kb/index.php?article=30) listed the F6 codes as possibly having something to do with improper grounding.  So we will get a service call.

THERE IS OVENSHUTDOWN THERMAL FUSE IN THE BACK THAT WILL SHUT DOWN THE ELEMENTS. I AM LOOKING FOR THE FUSE.