Belinea 2225S1W INSTRUCTION MANUAL NEEDED. YOU COME UP IN GOOGLE SEARCH AS BELINEA MANUALS. PLEASE ADVISE NEEDED NOW HELP!!! Thanks Guys Sorry caps were stuck on Upper Case :) [email protected]

If you are going to DIY and already try the monitor with another PC, and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/albums/yy352/budm/
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.
Please leave rating if it helps.

Download from here :

http://www.symplisit.com/simplisity/simplicity-monitormax06c2.html

Hope this help.

User manual: http://safemanuals.com/user-guide-instructions-owner-manual/BELINEA/101920-_E

http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

check you video card or the cables behind the monitor

http://www.belinea-treiber.de/

yes!that is the solution!!!

Try this?
http://download.cnet.com/Belinea-10-20-15-Art-No-112001/3000-2108_4-81850.html

Honestly the power supply uses capacitors to build up the high voltages required to run the monitor display. In all high probability one or more of these are failing and they are discharging to rapidly not allowing enough voltage to the display transformer. It won't come on until voltage is high enough. You're gonna need a new monitor soon, If you can obtain a schematic you can check the voltage drops across the output transformer and replace the faulty component but it is very time consuming and hard to get board components these days for digital supply boards in the states. Sorry I could not be of more assistance.

The simple answer is - Buy a new monitor.
Don not send it away - it will cost more.

is the problem with the PC or the Monitor?