Honda Landa PG  3500 PSI Pressure Washer Logo

Related Topics:

Posted on Jun 03, 2010

13hp honda motor what is the right psi for it

13hp honda motor what is the right psi for it thanks

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

  • Contributor 45 Answers
  • Posted on Feb 14, 2011
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Joined: Feb 13, 2011
Answers
45
Questions
0
Helped
17754
Points
60

It will depend on the pump that you have but the most common versions will be the 13HP PC4-35324 which is a direct drive unit or a PG4-35324 which is a belt drive unit. In both cases the machine would be 4GPM at 3500PSI.

Sincerely,
Aron Kerr
Landa Northwest
www.landanw.com
800.247.8103
503.255.6508

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Pull cord compartments have come off

With your question, I'm not sure if your looking for another or what your specific needs are but I believe this is it.
http://www.ebay.com/itm/NEW-PULL-START-RED-RECOIL-COVER-11HP-13HP-FITS-HONDA-GX340-GX390-/111147183055?pt=LH_DefaultDomain_0&hash=item19e0e36bcf

If you need further help, I’m available over the phone at https://www.6ya.com/expert/steve_f5a6ca85b5d1ffc9

1helpful
1answer

I have the John Deer 3800 psi from lowes. The machine is in great running order it just seems to be losing psi as I use it. Also checking the oil in the Honda 13hp motor and in the pump. Do you take the...

Thread the dip stip back in to get a true reading of the oil level. Either oil filler may be used to top off the crank case. There is only one crank case - the oil on one side is the same oil seen in the other filler.
0helpful
1answer

Run fuel line from truck tank to 13hp honda engine

This will work if the 13hp engine has its own fuel pump to draw fuel from the tank. Sounds like a good idea, use as mush steel line as possible to prevent line damage and associated leaks.
0helpful
4answers

I need to buy a pressure washer for residential/commercial work

Were I to pick from one of those three, I would pick the Landa. The most reliable pumps are Hotsy and since Karcher bought Landa and Hotsy, those three brands now have Hotsy pumps, though it doesn't say it on the machines.
0helpful
1answer
1helpful
2answers

Pump burned up?

The unit does not have auto shut off? Anyhow try to take out the oil and flush it by running good oil in and let it out again…then put oil and first see if you can turn it manually few turns and see if you hear any sound…then try to start it and see…let me know
Please do not forget to rate my service for the site to continue helping everyone and improve on it.
0helpful
1answer

Honda 13hp pressure washer cant get gas to my carburator

Hi there
If you have a Honda engine there's a fuel screen filter under the tank .
To get to it you have to remove the tank and turn the tank over so you can acess the filter. There's only 3 bolts holding the tank .
Check also the shut off gas valve by the choke .
Hope this help
3helpful
1answer

What is the gap setting for a 13hp honda motor

20 Thousands will work. If it does not, the you have other issues.
Not finding what you are looking for?

265 views

Ask a Question

Usually answered in minutes!

Top Honda Garden Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

john h

Level 3 Expert

29494 Answers

Jesse Walters
Jesse Walters

Level 2 Expert

337 Answers

Are you a Honda Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...