LG WD 10160FU. Shows CL on screen when powering up. Nothing else works. Cleared coin trap, found coin and elastic bands (child's!). Still no start.LG WD 10160FU. Shows CL on screen when powering up. Nothing else works. Cleared coin trap, found coin and elastic bands (child's!). Still no start.
I have a Inverter WM-12230FB Mine also has the CL message and i cant find my book to see how to clear it I dont have any temp buttons to press as mine has a dial can anyone tell me how to clear it please.
I have a Inverter WM-12230FB Mine also has the CL message and i cant find my book to see how to clear it I dont have any temp buttons to press as mine has a dial can anyone tell me how to clear it please.
You can't post conmments that contain an email address.
Error message CL solved. CL means child lock. To deactivate press two linked buttons (on my machine the right options button and the temp button) together for a couple of seconds.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the "HI", "LO" or "CL" error codes appear on the display for more than 5 minutes, a power reset may rectify the issue. Unplug the appliance, wait 5 minutes and then plug the unit back in. If the error code persists after a power reset, contact consumer care or an authorized service agent
There are many possibles that can cause "Close Front Cover"
Check the front cover actuator, switch. If all covers, switches is working fine, probably power supply is faulty.
What's the error message? Did it give you an error number?
My first thought: That printer detects if the front door is fully open, and if it's not, it gives you an error message and makes you turn it off and on. So look at the hinges where the door was connected and see if you can see the switch that tells the printer whether the door is open. Then figure out how to move that switch to the "open" position.
Hello, I've searched online for any similar problems and it seems that there's not a lot on the net for a CL error. Most were printer related. Just by seing things from a logical perspective, this error may be a tray issue, so try opening and closing the cash tray and see if this remedies the problem. If you can unplug the register from the power cord, do so and see if this helps. Try the unplugging with a closed and an opened tray. I'm not a cash register expert so this is just guesswork. Hope it helps.
That means that your washing machines child lock is on. You can find two buttons Temp and Options in the panel. Turn the machine on, press these two buttons together for 3 seconds and thats should be it.
I'm guessing C Linker is the executable we want to bring in to make FORTRAN and C be friends; maybe you're missing an include line or environment declaration on the C or FORTRAN side to get it done (or better error messages!)
CL is about the Child Lock which is done by pressing both the buttons together. To release the same do press both the buttons under the display simultaniously
THE CL ERROR CODE IS CHILD LOCK, PRESS AND HOLD THE PREWASH BUTTON FOR 3 SECONDS AND IT SHOULD TURN OFF........ BUT IF THERE ARE OTHER BUTTONS TO PRESS TRY IT OUT, THE OLDER LG'S HAD TWO BUTTONS TO PRESS, SO IF YOURS ARE THE OLDER ONES TRY IT OUT..... IF THIS HELPED OUT, PLS LEAVE A FEED BACK. I DO NOT ACCEPT PAYMENTS FROM ANYONE ONLY FEED BACKS, IT MOTIVATES ME TO HELP OUT OTHERS WHO NEEDS HELP....................
Is "CH" steady or flashing? If it's steady, the door is not shut properly. If it's flashing, the machine doesn't detect the presence of the toner cartridge (defective toner cartridge). Try another toner cartridge (an empty cartridge will do).
To get the blue handle to stay locked sometimes takes fiddling with it when the cartridge is in.
LG WD 10160FU. Shows CL on screen when powering up. Nothing else works. Cleared coin trap, found coin and elastic bands (child's!). Still no start.
I have a Inverter WM-12230FB Mine also has the CL message and i cant find my book to see how to clear it I dont have any temp buttons to press as mine has a dial can anyone tell me how to clear it please.
×