Hi there
I just made and update of my bios(Aspire 1640Z), and after I've made the BIOS update on start I receive 3 beeps(1 long & 2 short). I cant do enythin because screen is blank. I think it was the wrong bios for video card
Update BIOS with Boot Block Error Code/Beep:
Definitions Error Beeps Error Code (Port 80H)
BIOS updated successfully. 2L-1S-1L F1h
The BIOS file size is not equal to the BIOS ROM size; wrong BIOS file. 1L-1S F1h
The BIOS file can't be read; it is defective. 1L-2S F2h
The model ID is mismatched; wrong BIOS file. 3S F3h
The BIOS ROM has failed to be erased. Try to flash again. 2L-1S E1h
The BIOS ROM has failed to be programmed. Try to flash again. 2L-2S E2h
No diskette, or cannot locate the BIOS file.
Try to use a new formatted diskette and copy the BIOS file again. 2S D1h
2,543 views
Usually answered in minutes!
Blank sreen after bios update for acer aspire 1640z note book.
i have the same product and the same problem com you help me please!!!
Same happened to my travelmate 4072. Still has that problem. The laptop is unusable at this stage.
Tracer
Didnt try to update the video bios, updated the bios in general,
Machine does boot up but has no display and does the 3 beep codes.is hter ea way I can reverse this using the floppy and roll back my old bios
Percy
after flash the bios my computer make 1 bip long and 2 bips shorts, i tray reflash the bios with un floopy drive usb bat the problem continue, my computer is a ACER ASPIRE 1640Z, wats the correct bios for my machine? thanks.
i have also the same problem . Acer Aspire 1360 i updated all my drivers and i thought to update the bios also.. i got the wrong bios
the Laptop shutdown normally but did not restart. i power it on " 1 long beep then 2 short beeps" black screen , and the fan spining.
what i can do ? please help.
[email protected]
×