Trransistor by five legs had destroyed i want

As long as you didn't go crazy and tear them up, they'll be fine. Just retract all the legs and start over.

Good luck!

Dropping a hard drive is a sure way of destroying a hard drive.
If you need to get your data off this hard drive, there are companies that can recover data off a faulty hard drive BUT it will cost you an arm and a leg for their services.

Get a longer box!

bend over stick your head between you legs and kiss your a** goodbye...

Th TOP221P chip is available but I can almost guarantee you have other damage as well. I assume it is pin 5 that burned. D7 and C16 would certainly be destroyed. IF IT IS ANY OTHER pin, you will find many other parts destroyed. D7 is a common 1N4007 and C16 is 4.7mfd/450VDC. Remember to carve out any burned baord material as it is conductive.

For the chip you can procure it here:

http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=top221p

The numbers are legs to various components on the ice box a common leg a hot leg a compressor leg and a defrost heater leg. The leg off to itself is the hot leg L1 the common leg is tucked between the defrost leg and the compressor leg, as you turn the timer by manually advancing it you will notice a big difference between the 8 hour run sequence of the compressor leg and the 21 minute run cycle of the defrost leg, so it is easy to figure out which is which. A generic timer will come with extra connectors so that you can connect it to the same basic pattern as your old one.
The most common timer has the old 2143 pattern.


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

sir' my nokia 6070 on/off switch is destroyed.could you plz show me how make a jumper to restore the track.

jfdkj

thats kind a weird, but i been turning renches for over 20 yrs and never seem that happend, the only thing i will sujest is to look for the code numbers stamp it on engine block and make sure you have the engine size you think you have, and from there see if you are instyalling the right distribuitor for the right engine, there is many auto repairs than will know how to read the engine digits to make sure for engine size.

You should replace the green light (led).