Cannot access admin functions toshiba magnia sg20

No. You are on two different networks. Regardless of the hardware. Treat the home server just like any other PC or tablet. Make sure it has a dynamic IP via DHCP from your home router or ISP modem. Then connect via VPN.

You will not be able to network the two servers unless you have right equipment and network configuration. You would have to work with your service provider to obtain static IP's.

Internal IPs are irrelevant, because you can assign them your self internally. That means no one else sees them.

Your image is corrupt from an improper shut down. I had the same problem. Reinstall default .TIB and it will boot fine.

http://eu.computers.toshiba-europe.com/innovation/download_manuals.jsp?service=EU#

Search Archive
Magnia
then Model

Servers are networked with the clients using wired or wireless technologies .Numerous types are available. If you are new to this you could buy readymade fixtures for interconnecting. Select an appropriate OS as well.Your existing 2 computers can be clients to this server by adding necessary network hardware

Try the http://www.magnia.org

Assuming this problem is for ANY computer, not just the one.
If you still have internet access through the device, but cannot see network shares, your Samba server is down. If a full restart does not solve the problem, you need to learn Samba/Linux -or- you need to re-image the drive to factory defaults.

AnOldMan

Use a pen or paper clip to push the reset button that is on the back panel. Look toward the top by the power plug-in.

Press reset button on back of unit AFTER system has fully booted (time will be displayed) and your system will be back to default values - password = applianceadmin.

You can also re-image the drive to factory defaults.


AnOldMan

do you have an admin icon on your desktop?
if not type in the ip addx 192.168.1.1 and see if you go to the admin.
on network connections , right click on my network places, click map network drive,
select a drive letter and then browse for the two folders on the "myserver" select one of them and click apply or ok. the drive will show up in mycopmuter do the same for the other folders
as far as the log in is concerned it is best to set a level 3 user name and pw on the server then do the same user name and pw for a new windows login user.

Hi Steve You have to download Hiren's BootCD which will gives you all the tools you needed... Thankyou