I had used the SansaUpdater, DeviceRecovery, and the firmware software's on my sansa! it worked! but i had a new problem!
after the updates and recoveries! my sansa had been restarted!
when i opened it! it had a new image! the image should only be the word "SanDisk" right? but after thoses updates and recoveries, the new image was the sandisk logo which is the sandisk on the belly of a monster (http://www.flickr.com/photos/freddykgb/187034143/) that one! and my sansa is now on a "HANG" mode!
what should i do? please guys!
SOURCE: New SanDisk Sansa Clip freezes
Do this first:
http://forums.sandisk.com/sansa/board/message?board.id=clip&message.id=849&query.id=66344#M849
Then update your firmware:
http://forums.sandisk.com/sansa/board/message?board.id=clip&thread.id=718
I think you need to connect to a PC though, not sure
SOURCE: sansa e280 recovery mode
Try this: disconnect the player from the computer, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.
SOURCE: Sansa C140 hangs while switching on displaying SanDisk Logo
My Sansa C140 hangs up while switching on, it only displays SanDisk Logo. Plz help me to solve this problem
SOURCE: My Sandisk Sansa C140 only display sandisk logo
You can update the firmware. This will return your device to factory settings and fix any internal errors. All your current content will be deleted.
Download this file:
http://www.sendspace.com/file/0mc3km
This is the firmware update utility for Sanca c140 (c100 series) devices.
There is a howto.txt file included, follow the instructions.I am posting the instructions here for convenience.
1. Download the attached file and save it on the desktop.
(the player should not be attached to the computer at this point)
2. Double click the file to run it.
3. Accept the license agreement.
4. Remove the battery from the mp3 player.
5. Press and hold the center (select) button and connect it to the computer (keep holding the button, this is the firmware update mode).
6. If the New Hardware Wizard appears (now you can let go of the select button), do the following: (if asked, choose not to connect to the internet for updates), then choose to install the device automatically, then follow the prompts to finish the installation.
7. When the wizard comes up, or when the Update button becomes active (whichever happens first), you may release the select button.
8. Click the Update button, and then click OK to the message that comes up.
9. Wait until the upgrade finishes, then unplug the device.
10. Put the battery back in, and turn on the player.
11. Hopefully the update will be performed, then choose English for the language when prompted.
12. Check if the issue is resolved.
SOURCE: load main image failed switch to recovery mode
follow the above steps but turn on the power button if nothing is happening. It's the only way I got my e280 to recovery mode
81 views
Usually answered in minutes!
uhmm when i turn it on, the screen is like this http://www.flickr.com/photos/freddykgb/1...
and after that show's it only freezes, it would be on that screen until its batter goes empty!
it freezes saying refresh database
×